S14 Anti-sway Bar End Links - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

flytwa78 · 06-11-2007, 10:27 AM

I just purchased S14 front and rear Cusco anti-sway bars. It was suggested that I change out the end links or get inserts for them. Does anyone here know where I can find these? Thanks guys.

TheWolf · 06-11-2007, 10:41 AM

debloz parts on fleabay will have your front sway bar endlinks. You can use SPL as well but they're expensive. Don't go junkyard diving for endlinks. I did and after going through 6 s-chassis's I couldn't get a regular front pair without striped this or bent that. For the rear I used a prothane kit.

!Zar! · 06-11-2007, 12:31 PM

Splparts.com is the way to go.

hitman · 06-11-2007, 04:06 PM

scooter made some himself for like 40$. send him 5$ and he might tell you

floodo1 · 06-11-2007, 05:42 PM

spl isnt really expensive when you consider the quality of the heims that he uses. you can maybe make some cheap ones, but i doubt for 40....you need 4 heims alone

DJ_Sunrise · 06-11-2007, 06:02 PM

For drifting stiff as shit sway bars and endlinks are fine. If you look at road track cars, the sway bars usually aren't the stiffest shit available.. Stock with poly bushings, or stiffer.. but not over the edge. Or atleast stock endlinks are rocked. I have largus bars. With the poly bushings, the over steer was just insane. I put in OEM rubber bushings to loosen up the sways.. Car handles like a dream now. Great in the corners.

-Bart

overb0ost · 06-11-2007, 06:03 PM

Quote:

Originally Posted by hitman

scooter made some himself for like 40$. send him 5$ and he might tell you

heim joint and fc bracket = solid endlinks ftw

flytwa78 · 06-12-2007, 04:03 AM

Where can I get poly bushings from? I know of one company but they sell it as part of a set of poly bushings.

silnismo · 06-12-2007, 01:50 PM

http://www.pdm-racing.com/products/suspensionbush.html

there u go. scroll all da way down. 28$ a set shipped to ur door.

06-11-2007, 10:27 AM	#1
flytwa78 Leaky Injector Join Date: Jan 2006 Location: Guam Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	S14 Anti-sway Bar End Links I just purchased S14 front and rear Cusco anti-sway bars. It was suggested that I change out the end links or get inserts for them. Does anyone here know where I can find these? Thanks guys.

06-11-2007, 10:41 AM	#2
TheWolf Zilvia FREAK! Join Date: Aug 2005 Location: Orange Park, FL (Jax) Posts: 1,468 Trader Rating: (0) Feedback Score: 0 reviews	debloz parts on fleabay will have your front sway bar endlinks. You can use SPL as well but they're expensive. Don't go junkyard diving for endlinks. I did and after going through 6 s-chassis's I couldn't get a regular front pair without striped this or bent that. For the rear I used a prothane kit. __________________ Eye on the Prize

06-11-2007, 12:31 PM	#3
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	Splparts.com is the way to go. __________________

06-11-2007, 04:06 PM	#4
hitman Zilvia FREAK! Join Date: Mar 2006 Location: late 19th century prussia Age: 37 Posts: 1,057 Trader Rating: (3) Feedback Score: 3 reviews	scooter made some himself for like 40$. send him 5$ and he might tell you __________________ driftparty.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-11-2007, 05:42 PM	#5
floodo1 Zilvia Junkie Join Date: Mar 2004 Location: Fresno, CA, USA Posts: 403 Trader Rating: (0) Feedback Score: 0 reviews	spl isnt really expensive when you consider the quality of the heims that he uses. you can maybe make some cheap ones, but i doubt for 40....you need 4 heims alone

06-11-2007, 06:02 PM	#6
DJ_Sunrise Zilvia FREAK! Join Date: Feb 2004 Location: NJ Age: 38 Posts: 1,134 Trader Rating: (1) Feedback Score: 1 reviews	For drifting stiff as shit sway bars and endlinks are fine. If you look at road track cars, the sway bars usually aren't the stiffest shit available.. Stock with poly bushings, or stiffer.. but not over the edge. Or atleast stock endlinks are rocked. I have largus bars. With the poly bushings, the over steer was just insane. I put in OEM rubber bushings to loosen up the sways.. Car handles like a dream now. Great in the corners. -Bart

06-12-2007, 04:03 AM	#8
flytwa78 Leaky Injector Join Date: Jan 2006 Location: Guam Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	Where can I get poly bushings from? I know of one company but they sell it as part of a set of poly bushings.