ignition cylinder wires

[westcoastpj]

hey guys,


ok.heres my problem

i tried to install a push button start because it was very difficult to start my car with the hey.you'd have to move it around.blah blah blah..ok,so i tried to install it,and had to splice the green wire from the ignition cylinder.so i cut the wire completey and soldered it back together with the push start wire.well,it all didnt work,so i jsut let it be.when i turned the car on,my radio was getting no power at all.also,the clock wasnt getting enough power because you can barely see it,and it resets everytime i turn the car off.



now the soldering job is probably the worst i have done.heres some low quality pics

http://i53.photobucket.com/albums/g5...05-07_0252.jpg


http://i53.photobucket.com/albums/g5...05-07_0254.jpg
http://i53.photobucket.com/albums/g5...05-07_0253.jpg

could this be causing the clock to reset everytime?and for no power to get to the radio?i made sure all connections were tight.my car still starts,but it takes a couple trys.