WTB: S13 SOHC main ecu harness

[jmhalder]

needing a S13 SOHC (from a manual trans. car) ECU harness for my S14... let me explain, im trying to run a U12 ecu in my S14 KA, for the most part the S14 sensors will work just fine, with the exception being the MAF and the dizzy (just needs to be clocked or adjusted for in the ECU) but i wont be running a maf because ill be running deviousKA's MAP based code with a MPX4250 map sensor... and higher resolution 16x32 maps and zeitune (deviousKA's consult/tuning software)... anywho, i have a hideous adapter harness that im making, and it SHOULD work, but come springtime i want to have connectors for the S14 sensors on a S13SOHC harness... and it'l be plug-n-play... im not looking to spend much, anyone with one that sold a block or swapped to a DOHC hit me up by emailing me at joes240nismo AT yahoo DOT com
thanks in advance guys! btw, the build thread is located here: http://eccs.hybridka.com/viewtopic.php?t=1448