pricce ?'s

[s13.dark1]

im going to upgrade my sr internals but would it be best to just get a rebuild kit? or a stroke kits? and priceing, mind u i have to take it to a shop cause i dont now how to put it in all right.


body work? my d/s (driver side) rear panal (basicaly were the door ends and about a foot or so past my door) is smashed in. wat would be best at a ok price? wide body kit over it? or have a body shop do there thing. i have no idea how mucha body shop would charger, just wanted to get your info.

[shmiddy]

Bc Makes A Stoker Kit For Like 8 Grand Or Something Its Pretty Expencive

[s13.dark1]

damn i didnt think i was that much any one now the price to a good rebuild kit?

[MomentumGT]

Originally Posted by s13.dark1

im going to upgrade my sr internals but would it be best to just get a rebuild kit? or a stroke kits? and priceing, mind u i have to take it to a shop cause i dont now how to put it in all right.

What kind of power are you trying to achieve? or do with the car? SR internals can handle a lot before the need to upgrade...unless the motor is already toast.

-Jon

[Sileighty_85]

Wiseco Pistons-$500 Enjukuracing.com
Eagle H-Con Rods- $350 ^^
ARP Head Studs $115 ^^
Tomei Con-Rod Bearings $120? RHDJapan.com
Nismo Main Bearings- $145? ^^
Pulsar GTI-R Main Crank Bolts (20%Stronger than OEM) $35Hybridynamics.com
Power Enterprise 1.5 mil H/G $200? Hybrid

boreing/Honing
Balance/Polished Crank
Head Milled, Leak Checked
Hot Tanked
Cost me $300 for all but varies between Machine Shops

Go ahead and get a new oil pump while your at it too
Thenismoshop.com has the Cheapest Oil pump ive seen so far

[ROUGE180]

Originally Posted by shmiddy

Bc Makes A Stoker Kit For Like 8 Grand Or Something Its Pretty Expencive

uhhhhhh .. thats crazy town. They have 2 kits 1 for $2950 and 1 for $3300. Info taken from BC site.

[bejota180sx]

Originally Posted by Sileighty_85

Wiseco Pistons-$500 Enjukuracing.com
Eagle H-Con Rods- $350 ^^
ARP Head Studs $115 ^^
Tomei Con-Rod Bearings $120? RHDJapan.com
Nismo Main Bearings- $145? ^^
Pulsar GTI-R Main Crank Bolts (20%Stronger than OEM) $35Hybridynamics.com
Power Enterprise 1.5 mil H/G $200? Hybrid

boreing/Honing
Balance/Polished Crank
Head Milled, Leak Checked
Hot Tanked
Cost me $300 for all but varies between Machine Shops

Go ahead and get a new oil pump while your at it too
Thenismoshop.com has the Cheapest Oil pump ive seen so far

if u decide on something like this give it a little more $$$ and get some stronger valve and valve springs if u want and some RAS for a bit of protection...

that is if you are like running high cams or some insane abuse to the engine... but yeah wiseco pistons and eagle rods are a great mix
you can also try arias pistones ive seen and read good reviews about them...

[Jung918]

stay away from Enjukuracing.com. Maybe at one point they might have been good, but they have gone to shit

[reccakun08]

wiseco piston or cp pistons?

[timlush]

Originally Posted by Jung918

stay away from Enjukuracing.com. Maybe at one point they might have been good, but they have gone to shit

Can you explain?

[s13.dark1]

yeah explain^^ good info everyone thats

[180sx_Drifter]

wait whats wrong with enjuku? plz i would love some info on this...

[Jung918]

I had a bad experience through them. I bought a radiator panel for my kouki. They said that it would fit both the zenki and kouki. However the fornt radiator support are different so they did not fit. I e-mailed them about it and they asked for pics. I took pics and sent it to them. They never responded. I bitched about it here and someone said they even showed them my post. Still no response.

There is also a thread about a guy buying a sr motor from them. First one was junk, so he sent it back. Got another one and it was also junk. Then he decided to just rebuild it.