windsheild wipers wont work - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rb25jun · 01-23-2008, 12:30 PM

ok heres my other problem when i got my wiring done for my sr swap.. the wipers were not included... sooo what im hoping is, is there any way i can hard wire the wiper motor to the wiper switch inside the car or is there any real serious way i can get it fixed.. please onces again someone help me out.. i have a 97 s14 kouki with a blktp sr20

Ichi-Go · 01-23-2008, 01:15 PM

How low is your car. Sometimes your tire eats through the wiring harness on the drivers side fender well causing your wipers to not work and/or other electrical issues.

g6civcx · 01-23-2008, 01:19 PM

97 S14s come in 2 models:

non-SE's do not have intermittent wipers.
SE's have intermittent wipers.

Read the FSM. It's easy to wire.

projectRDM · 01-23-2008, 02:17 PM

You'll need to include the wiper amplifier, the circuit does not go straight from switch to motor.

And to correct the post above, all 97-98 have intermittent wipers. The base model are fixed in one position, SE models are variable, with several settings. Both models are prewired though and only require the addition of the SE switch to add the variable control. 95-96 owners are not so lucky, the base model is not prewired and the amplifier is different between base and SE.

farazshah · 02-26-2008, 10:20 AM

Does anyone have a photo or a verbal description of where the wiper amplifier is on a 95 base model? I am having the same problem...and it is snowing here. Would it just be extending the wires from the amplifier output to the wiper motor plug?

DaPCWiz · 02-26-2008, 10:27 AM

Quote:

Originally Posted by farazshah

Does anyone have a photo or a verbal description of where the wiper amplifier is on a 95 base model? I am having the same problem...and it is snowing here. Would it just be extending the wires from the amplifier output to the wiper motor plug?

The FSM should help - www.phatg20.net has them.

farazshah · 02-26-2008, 10:31 AM

Already checked FSM, but did not find the location of the amp... If I understood the FSM correctly, it would just be extending wires from the amp outlet to the wiper motor plug inlet.

g6civcx · 02-26-2008, 10:43 AM

Quote:

Originally Posted by projectRDM

And to correct the post above, all 97-98 have intermittent wipers. The base model are fixed in one position, SE models are variable, with several settings. Both models are prewired though and only require the addition of the SE switch to add the variable control. 95-96 owners are not so lucky, the base model is not prewired and the amplifier is different between base and SE.

This is correct. Base models have fixed intermittent wipers at 7 second intervals. SE models have variable intermittent wipers adjustable between 3-13 seconds.

As a note, the FSM specs "with intermittent wiper models". I'm not sure if they're implying that some S14s do not have intermittent wipers at all, but so far I haven't seen any. Maybe in Japan or elsewhere.

projectRDM · 02-26-2008, 02:40 PM

Quote:

Originally Posted by farazshah

Does anyone have a photo or a verbal description of where the wiper amplifier is on a 95 base model? I am having the same problem...and it is snowing here. Would it just be extending the wires from the amplifier output to the wiper motor plug?

Same place it's located on every S14, right behind the ASCD actuator, beside the wiper motor.

shadowexpo · 02-26-2008, 03:03 PM

whats this about just extending the wires to the amp..is it true?..i had to get the switch off a altima because mine broke..i have a 95 base so the switch doesn't do anything more then the old one but i sure would lik to be able to use the settings if possible..or are they diff..both were posted so who's right?.

shadowexpo · 02-27-2008, 08:33 PM

come on guys whats the answer..

soon2bs13 · 02-27-2008, 08:48 PM

Quote:

Originally Posted by shadowexpo

come on guys whats the answer..

Rain X my young pad-one

WangonwWarrior · 02-27-2008, 08:56 PM

Quote:

Originally Posted by Ichi-Go

How low is your car. Sometimes your tire eats through the wiring harness on the drivers side fender well causing your wipers to not work and/or other electrical issues.

+1 i have seen this many times, just look up in the fender well and you will know

shadowexpo · 02-27-2008, 09:21 PM

Quote:

Originally Posted by soon2bs13

Rain X my young pad-one

hahahayea i ready use rain-x they are great by the way..i jus want the option so i dont have to mess with the lever when its only mist or when you need it a lil faster just not to the second setting..

projectRDM · 02-27-2008, 09:58 PM

Quote:

Originally Posted by shadowexpo

whats this about just extending the wires to the amp..is it true?..i had to get the switch off a altima because mine broke..i have a 95 base so the switch doesn't do anything more then the old one but i sure would lik to be able to use the settings if possible..or are they diff..both were posted so who's right?.

What? You have to actually explain what you're asking, we can't read your mind.

shadowexpo · 02-27-2008, 11:28 PM

Quote:

Originally Posted by projectRDM

What? You have to actually explain what you're asking, we can't read your mind.

my question is if it is possible to use the interval settings for the wipers on the 95 base by just extending the wires to make it work or do you need to get a new amp and wire it up to get the option..i said i have the wiper switch off an altima that has the option for what i want but i can not use it because it is not wired..so again can i just wire it up to make it work or do i need to get the new amp then wire it..

im pretty sure that explains it better..

projectRDM · 02-28-2008, 09:05 AM

You'll need to run one wire and use the SE amplifier. Read the FSM to see the difference.

tanks13 · 02-28-2008, 09:09 AM

yo by the way ur motor is a red top

01-23-2008, 12:30 PM	#1
rb25jun Zilvia Addict Join Date: Jul 2007 Location: Eagle Rock Age: 38 Posts: 623 Trader Rating: (6) Feedback Score: 6 reviews	windsheild wipers wont work ok heres my other problem when i got my wiring done for my sr swap.. the wipers were not included... sooo what im hoping is, is there any way i can hard wire the wiper motor to the wiper switch inside the car or is there any real serious way i can get it fixed.. please onces again someone help me out.. i have a 97 s14 kouki with a blktp sr20

01-23-2008, 02:17 PM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You'll need to include the wiper amplifier, the circuit does not go straight from switch to motor. And to correct the post above, all 97-98 have intermittent wipers. The base model are fixed in one position, SE models are variable, with several settings. Both models are prewired though and only require the addition of the SE switch to add the variable control. 95-96 owners are not so lucky, the base model is not prewired and the amplifier is different between base and SE. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

02-26-2008, 03:03 PM	#10
shadowexpo Join Date: Jul 2007 Location: los angeles Age: 38 Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	whats this about just extending the wires to the amp..is it true?..i had to get the switch off a altima because mine broke..i have a 95 base so the switch doesn't do anything more then the old one but i sure would lik to be able to use the settings if possible..or are they diff..both were posted so who's right?. __________________

02-27-2008, 08:33 PM	#11
shadowexpo Join Date: Jul 2007 Location: los angeles Age: 38 Posts: 27 Trader Rating: (0) Feedback Score: 0 reviews	come on guys whats the answer.. __________________

02-28-2008, 09:05 AM	#17
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	You'll need to run one wire and use the SE amplifier. Read the FSM to see the difference. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

01-23-2008, 01:15 PM	#2
Ichi-Go Leaky Injector Join Date: Jan 2004 Location: Jacksonville,FL Age: 37 Posts: 122 Trader Rating: (0) Feedback Score: 0 reviews	How low is your car. Sometimes your tire eats through the wiring harness on the drivers side fender well causing your wipers to not work and/or other electrical issues.

01-23-2008, 01:19 PM	#3
g6civcx Post Whore! Join Date: Apr 2004 Location: Virginia, USA Posts: 5,764 Trader Rating: (5) Feedback Score: 5 reviews	97 S14s come in 2 models: non-SE's do not have intermittent wipers. SE's have intermittent wipers. Read the FSM. It's easy to wire.

02-26-2008, 10:20 AM	#5
farazshah Leaky Injector Join Date: Oct 2007 Location: West Lafayette, IN Age: 40 Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	Does anyone have a photo or a verbal description of where the wiper amplifier is on a 95 base model? I am having the same problem...and it is snowing here. Would it just be extending the wires from the amplifier output to the wiper motor plug?

02-26-2008, 10:31 AM	#7
farazshah Leaky Injector Join Date: Oct 2007 Location: West Lafayette, IN Age: 40 Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	Already checked FSM, but did not find the location of the amp... If I understood the FSM correctly, it would just be extending wires from the amp outlet to the wiper motor plug inlet.

02-28-2008, 09:09 AM	#18
tanks13 Zilvia FREAK! Join Date: Sep 2007 Location: Highland Park,CA 90042 Age: 37 Posts: 1,008 Trader Rating: (13) Feedback Score: 13 reviews	yo by the way ur motor is a red top __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode