safc neo install in 95 s14 ka24de...help??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

nismo_drifter · 06-18-2008, 07:23 PM

i installed a safc neo in my 95 s14 with the stock ka24de...everything but eothe rpm signal does not work???the throttle position sensor works, the volt meter works, correlation of air flow works, but the rpm on the safc does not work???

i hooked it up to pin #3 on the ecu its the yellow with red stripe and silver rings...is this the right one???i checked the connections and its all good but it does not work???i have my turbo timer hooked up to this wire too...i used the ecu pin out for a obd1 because my friend told me that it was a obd1 and when i searched online i found that 95 s14 comes in obd1 and obd2 so how can i tell the difference???any help please...thanks

97KATURBOSILVIA · 06-18-2008, 07:31 PM

just searched. found the rpm signal can be #7 pin not #3. heres the link good luck

http://www.200sx.org/s14-ecu.html

essforteen · 06-19-2008, 12:53 AM

http://www.240sx.org/faq/articles/95_ecu_pinout.htm

this one is a little easier to read check it out

nismo_drifter · 06-19-2008, 11:37 PM

how do know if my car is a obd1 or obd2???

MangoDorifto · 06-20-2008, 01:19 AM

if it's a 95, made before 10/95 it's odb1. 10/95-up is 96, which is obd2.

06-18-2008, 07:23 PM	#1
nismo_drifter Zilvia Addict Join Date: Nov 2006 Location: socal Posts: 710 Trader Rating: (14) Feedback Score: 14 reviews	safc neo install in 95 s14 ka24de...help??? i installed a safc neo in my 95 s14 with the stock ka24de...everything but eothe rpm signal does not work???the throttle position sensor works, the volt meter works, correlation of air flow works, but the rpm on the safc does not work??? i hooked it up to pin #3 on the ecu its the yellow with red stripe and silver rings...is this the right one???i checked the connections and its all good but it does not work???i have my turbo timer hooked up to this wire too...i used the ecu pin out for a obd1 because my friend told me that it was a obd1 and when i searched online i found that 95 s14 comes in obd1 and obd2 so how can i tell the difference???any help please...thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-18-2008, 07:31 PM	#2
97KATURBOSILVIA Banned from the Marketplace Join Date: Feb 2008 Location: MELBOURNE FL Age: 44 Posts: 199 Trader Rating: (-1) Feedback Score: -1 reviews	just searched. found the rpm signal can be #7 pin not #3. heres the link good luck http://www.200sx.org/s14-ecu.html

06-19-2008, 12:53 AM	#3
essforteen Nissanaholic! Join Date: Apr 2007 Location: LAX Area (So CAL) Posts: 1,802 Trader Rating: (50) Rides Gallery: essforteen Feedback Score: 50 reviews	http://www.240sx.org/faq/articles/95_ecu_pinout.htm this one is a little easier to read check it out

06-19-2008, 11:37 PM	#4
nismo_drifter Zilvia Addict Join Date: Nov 2006 Location: socal Posts: 710 Trader Rating: (14) Feedback Score: 14 reviews	how do know if my car is a obd1 or obd2???

06-20-2008, 01:19 AM	#5
MangoDorifto Leaky Injector Join Date: Oct 2005 Location: Oregon Posts: 113 Trader Rating: (8) Feedback Score: 8 reviews	if it's a 95, made before 10/95 it's odb1. 10/95-up is 96, which is obd2.