Z32 turbo pistons in SR20DET - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

timtiminy · 09-22-2008, 01:50 AM

hey guys i was looking around and found that some FWD SR guys are putting Z32 300zx turbo pistons in there DE motors as a cheap alternative to expensive forged overbore low compression pistons. The info i have on them so far is that they are 87mm and 8.5:1 compression ratio and fit the oem rods. I have yet to hear of anyone using these in their rwd SR20DET, I may try it as i have to bore out my block and need to save money somewhere. Plus I wont be going over 350hp so I think these will be a good option. If anyone has any info on this or has done it before, please post. I am really interested in this option rather than spending $500 on forged pistons.

09-22-2008, 01:50 AM	#1
timtiminy Zilvia Addict Join Date: Feb 2006 Location: Socal Posts: 624 Trader Rating: (0) Feedback Score: 0 reviews	Z32 turbo pistons in SR20DET hey guys i was looking around and found that some FWD SR guys are putting Z32 300zx turbo pistons in there DE motors as a cheap alternative to expensive forged overbore low compression pistons. The info i have on them so far is that they are 87mm and 8.5:1 compression ratio and fit the oem rods. I have yet to hear of anyone using these in their rwd SR20DET, I may try it as i have to bore out my block and need to save money somewhere. Plus I wont be going over 350hp so I think these will be a good option. If anyone has any info on this or has done it before, please post. I am really interested in this option rather than spending $500 on forged pistons.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode