tps settings for s13 blacktop?? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Bolo · 01-01-2003, 01:31 PM

Anyone know the correct TPS settings for an S13 blacktop SR?? I think mine is out of spec causing my car to stumble. I have found the specs for the KA and the S14 SR. Should my settings be the same as the S14 SR?

Just for reference:

DOHC KA
Accelerator Pedal Condition Resistance in k Ohms
Completely released Approx. 2
Partially released 2 -10
Completely depressed Approx. 10
output voltage at idle 0.45 - 0.55 volts.

S14 SR
Accelerator Pedal Condition Resistance in k Ohms
Completely released Approx. 0.7
Partially released 0.7 - 5
Completely depressed Approx. 5
output voltage at idle 0.45 - 0.55 volts.

Thanks for any help.

01-01-2003, 01:31 PM	#1
Bolo Leaky Injector Join Date: May 2002 Location: Bay Area Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	tps settings for s13 blacktop?? Anyone know the correct TPS settings for an S13 blacktop SR?? I think mine is out of spec causing my car to stumble. I have found the specs for the KA and the S14 SR. Should my settings be the same as the S14 SR? Just for reference: DOHC KA Accelerator Pedal Condition Resistance in k Ohms Completely released Approx. 2 Partially released 2 -10 Completely depressed Approx. 10 output voltage at idle 0.45 - 0.55 volts. S14 SR Accelerator Pedal Condition Resistance in k Ohms Completely released Approx. 0.7 Partially released 0.7 - 5 Completely depressed Approx. 5 output voltage at idle 0.45 - 0.55 volts. Thanks for any help. Last edited by Bolo; 01-01-2003 at 01:34 PM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode