VA Aftermarket SR dump pipe. CHEAP. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SHIFT_*grind* · 09-02-2008, 03:24 PM

Unknown brand dump pipe for SR. It fits a little tight going onto the turbo (T28), and I had to hammer it a little on one side to clear the transmission, but it works fine. Plenty of cross-section for great flow, even with the minor hammering.

Most aftermarket elbows have one of the top holes slotted to fit T25/28, this one does not which is why it's tight going on. It goes on fine; a couple minutes with a Dremel and it would be easier.

Skinny O2 bung (M12 x 1.25).

You can see where it was hammered a little on the right side, in this pic:

Lots of flow:

$40 shipped. If you're local to Virginia Beach, cheaper.

PM me, I need shit gone.

SHIFT_*grind* · 09-05-2008, 04:45 PM

It flows, it works, and it's $40 to your door, buy it.

SHIFT_*grind* · 09-08-2008, 02:06 PM

One mo' 'gain.

s13.5 · 09-09-2008, 03:45 PM

30 shipped?

SHIFT_*grind* · 09-09-2008, 03:51 PM

It's a $30 dump pipe that I spent $40 to make work ($20 to machine the flanges flat, $20 to weld the O2 bung into the oversized hole), so no.

09-02-2008, 03:24 PM	#1
SHIFT_grind Nissanaholic! Join Date: Nov 2004 Location: NWA Age: 42 Posts: 2,066 Trader Rating: (7) Feedback Score: 7 reviews	Aftermarket SR dump pipe. CHEAP. Unknown brand dump pipe for SR. It fits a little tight going onto the turbo (T28), and I had to hammer it a little on one side to clear the transmission, but it works fine. Plenty of cross-section for great flow, even with the minor hammering. Most aftermarket elbows have one of the top holes slotted to fit T25/28, this one does not which is why it's tight going on. It goes on fine; a couple minutes with a Dremel and it would be easier. Skinny O2 bung (M12 x 1.25). You can see where it was hammered a little on the right side, in this pic: Lots of flow: $40 shipped. If you're local to Virginia Beach, cheaper. PM me, I need shit gone. __________________ My seller review thread

09-05-2008, 04:45 PM	#2
SHIFT_grind Nissanaholic! Join Date: Nov 2004 Location: NWA Age: 42 Posts: 2,066 Trader Rating: (7) Feedback Score: 7 reviews	It flows, it works, and it's $40 to your door, buy it. __________________ My seller review thread

09-08-2008, 02:06 PM	#3
SHIFT_grind Nissanaholic! Join Date: Nov 2004 Location: NWA Age: 42 Posts: 2,066 Trader Rating: (7) Feedback Score: 7 reviews	One mo' 'gain. __________________ My seller review thread

09-09-2008, 03:51 PM	#5
SHIFT_grind Nissanaholic! Join Date: Nov 2004 Location: NWA Age: 42 Posts: 2,066 Trader Rating: (7) Feedback Score: 7 reviews	It's a $30 dump pipe that I spent $40 to make work ($20 to machine the flanges flat, $20 to weld the O2 bung into the oversized hole), so no. __________________ My seller review thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-09-2008, 03:45 PM	#4
s13.5 Leaky Injector Join Date: Sep 2006 Location: north carolina Age: 44 Posts: 135 Trader Rating: (1) Feedback Score: 1 reviews	30 shipped?