![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
![]() |
#1 |
No Limit Soldier.
![]() Join Date: Jan 2006
Location: Hayward CA, San Gabriel CA
Age: 38
Posts: 5,550
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
In need of some fast tech anwsers.
So.
I just swapped an s13 SR into a hatch a few days ago. I bought the motorset from JonWayne (Sil-ABC) so I know it's legit. So I pulled out the old ka...swapped in the SR..wired everything up. everything seemed fine. I cranked it over...fired up fine first time. w00t. but It was sounding like a subbie... I checked the coilpacks they are getting power to them. (pulse light) I even tried replacing the coilpacks from my last motorset; which I new worked...but nothing changed. and I replaced the coilpack harness from my last motorset; which I new worked...but nothing changed. I checked the injectors aswell. (pulse light) I even pulled out the multimeter and the numbers were correct. they seem to be getting power to them aswell. The car is misfiring...and honestly...I'm stumped.. I checked the fuel sending lines...and they are sending fuel fine. where should I be looking next? I was thinking about the ecu wiring... any help would be greatly appreciated. EDIT* I even put new iridium plugs in and gapped them at .28 #1 and #3 are the cylinders misfiring. Ignitor is good. Coilpacks are good. No damage on the rubber ends. Spark plugs are not getting blow-by.
__________________
allntrlundrgrnd: "you never really appreciate your parents fridge until you look into your own and its full of condiments only" Last edited by downshift_sideways; 10-18-2008 at 01:15 AM.. |
![]() |
![]() |
Sponsored Links |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|