![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Post Whore!
![]() |
15x7, eibach sportlines, no break upgrade. lowest offset i can clear w/o spacers?
looking at some ~+7 mesh rims to buy. i have an s13 w/ eibach sportlines and i am not planning on doing the z32 switch or coilovers. can i clear ~7 offset?
|
![]() |
![]() |
Sponsored Links |
![]() |
#2 |
Post Whore!
![]() Join Date: May 2002
Location: Orange County, California
Age: 46
Posts: 16,640
Trader Rating: (23)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 23 reviews
|
lowest offset..-10 or more
you'll clear everything lower then a 30 w/o problems. but go lower then a 10 and they'll stick outside the fender, they can also stick out if the tire size is bulgy as well. 7"? go 205/55/xx negative camber and spacers fix all my 'offset' problems..muhahahahaha |
![]() |
![]() |
![]() |
#4 |
Post Whore!
![]() |
![]() Haha "a la adey style"... I like that! I'm flattered!
![]() You should be able to fit a 15x7 +7 with ease, either front or back. if you put it up front you'd probably need about -1.5 or -2 degrees of nega camba, but they may fit w/out neg camber if you put a 195 tire (or similar) on it. My volks (gold ones) are 15x7 +5 and they fit the rears fine... I had to hammer out my qtr panel 'flap' thingy a little, but again, if you run a skinnier tire (195) you shouldn't have problems. Your offset is also 2mm higher. ![]()
__________________
Instagram: @SX180HKG |
![]() |
![]() |
![]() |
#5 |
Zilvia Member
![]() |
hey steve, are you talking about that club4ag post? Cause i can assure you they're +17 offset, not +7. That guy probably read it wrong or is lying about the real offset.
Being 15x7" with +7 offset, you would have a bigger lip. not like this one... ![]()
__________________
![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|