4x6 rear speaker removal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RedlineRacer · 02-28-2003, 10:12 PM

I've been redoing my stereo in my fastback. I just got in my headunit and just put in some 6 1/2 infinity components yesterday. Next is the 4x6 in the rear. How the crap do you get those speakers out? I can't even get a skrewdriver in there to loosen the screws cause the window is right above the speaker.

boro240 · 02-28-2003, 10:21 PM

when i did it i took it off from the plastic, not the speaker itself. i found that to be easyer. it still is pretty hard though. you might wanna take off some of the rear interior plastic to give you better physical and visual access. sorry if its not too clear. hope that helps.

RedlineRacer · 02-28-2003, 10:27 PM

yeah, i know what you are talking about, the yellowish colored plastic peiece it skrews down to. i was thinking about that, but it still looks like a pain in the a** to remove.

Natty · 02-28-2003, 11:22 PM

Have a swiss army knife? I folded mine at 90degress and it worked fine, you just have to unscrew 45degress at a time. It sucks. That or try using the liittle "bit" from a cordless screwdriver. Use pliers on the bit to get some torque.
I installed my 4x6 plates in the Best Buy parking lot with a swiss army knife. The fronts are not so easy, as you may have found out.
Oh, pray you don't have "active" amped speakers.
Jeff

syco3d · 03-01-2003, 08:06 AM

I just put a small socket on my rachet (not sure what size) that my screw driver bits I use in my drills would fit into. Then I Just racheted those lil pos screws right out.

EDIT: Ie. I left the plastic 'case' intact and just removed the speaker.

RedlineRacer · 03-01-2003, 10:54 AM

actually the front were very easy to put in. i just made a custom piece of wood and mounted the 6 1/2 and the tweeter on it, but i had a hard time finding a spot to the crossover and not let it rattle around.

Tubed4evr · 03-01-2003, 11:11 AM

go to sears and look for a tool that looks sorta like an alan wrench but has a screw driver end on it. That tool is more usefull than you can imagine.

Here it is

misnomer · 03-01-2003, 03:38 PM

An offset screwdriver will work great (cheap too). I pulled mine off using a l'il short stubby phillips head :P

nrcooled · 03-01-2003, 10:30 PM

I used the phillips head drill bit w/ vice grips and it worked. They are just a PITA. Can you post or e-mail pics of your component set up [email protected] I am trying to get ideal for component set-up and placement

RedlineRacer · 03-02-2003, 12:01 AM

Quote:

Can you post or e-mail pics of your component set up [email protected] I am trying to get ideal for component set-up and placement

Sure, i'll take some pics later on today. it looks real ghetto tho. Its just 1/2 inch MDF and the speakers mounted to it. I love my infinity's, they are real clear. the bass isn't bad, but thats why i have my subs on the way.

gregsr20 · 03-03-2003, 04:43 PM

sears rachet driver, 9.99, comes in phillips and flathead 3 different sizes for each

02-28-2003, 10:12 PM	#1
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	4x6 rear speaker removal I've been redoing my stereo in my fastback. I just got in my headunit and just put in some 6 1/2 infinity components yesterday. Next is the 4x6 in the rear. How the crap do you get those speakers out? I can't even get a skrewdriver in there to loosen the screws cause the window is right above the speaker.

02-28-2003, 11:22 PM	#4
Natty Zilvia Addict Join Date: Dec 2001 Location: Nashville, TN Posts: 944 Trader Rating: (0) Feedback Score: 0 reviews	Have a swiss army knife? I folded mine at 90degress and it worked fine, you just have to unscrew 45degress at a time. It sucks. That or try using the liittle "bit" from a cordless screwdriver. Use pliers on the bit to get some torque. I installed my 4x6 plates in the Best Buy parking lot with a swiss army knife. The fronts are not so easy, as you may have found out. Oh, pray you don't have "active" amped speakers. Jeff __________________ 1991 White 240sx Fastback LE, rusty spoiler, weak driveshaft, exhaust rattle.... Rattles are just your cars way of saying 'I love you.'

03-01-2003, 08:06 AM	#5
syco3d Zilvia Junkie Join Date: Dec 2002 Location: Topeka, Ks Age: 41 Posts: 363 Trader Rating: (0) Feedback Score: 0 reviews	I just put a small socket on my rachet (not sure what size) that my screw driver bits I use in my drills would fit into. Then I Just racheted those lil pos screws right out. EDIT: Ie. I left the plastic 'case' intact and just removed the speaker. __________________ Gimme a "A"! Gimme a "P"! Gimme a "C"! What does that spell? CRAP!

03-01-2003, 03:38 PM	#8
misnomer Nissanaholic! Join Date: Jul 2001 Location: Nevada Posts: 2,293 Trader Rating: (0) Feedback Score: 0 reviews	An offset screwdriver will work great (cheap too). I pulled mine off using a l'il short stubby phillips head :P __________________ Rowsdower saves us and saves all the world!

03-01-2003, 10:30 PM	#9
nrcooled Nissanaholic! Join Date: Mar 2002 Location: Turn 8 'bout to get rolled by a SC'd ITR Age: 46 Posts: 1,849 Trader Rating: (0) Feedback Score: 0 reviews	I used the phillips head drill bit w/ vice grips and it worked. They are just a PITA. Can you post or e-mail pics of your component set up [email protected] I am trying to get ideal for component set-up and placement __________________ '91 hatch w/ SR Sold; '03 Evo Sold 401 HP; '03 MS Protege sold; '00 Evo 6.5 TME Sold 300HP

02-28-2003, 10:21 PM	#2
boro240 Zilvia FREAK! Join Date: Jan 2003 Location: Tucson, AZ Age: 40 Posts: 1,324 Trader Rating: (0) Feedback Score: 0 reviews	when i did it i took it off from the plastic, not the speaker itself. i found that to be easyer. it still is pretty hard though. you might wanna take off some of the rear interior plastic to give you better physical and visual access. sorry if its not too clear. hope that helps.

02-28-2003, 10:27 PM	#3
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	yeah, i know what you are talking about, the yellowish colored plastic peiece it skrews down to. i was thinking about that, but it still looks like a pain in the a** to remove.

03-01-2003, 10:54 AM	#6
RedlineRacer Zilvia FREAK! Join Date: Sep 2002 Location: Clemson, South Carolina Age: 40 Posts: 1,054 Trader Rating: (0) Feedback Score: 0 reviews	actually the front were very easy to put in. i just made a custom piece of wood and mounted the 6 1/2 and the tweeter on it, but i had a hard time finding a spot to the crossover and not let it rattle around.

03-01-2003, 11:11 AM	#7
Tubed4evr Zilvia Member Join Date: Aug 2002 Location: Virginia Tech / Chesapeake, VA Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	go to sears and look for a tool that looks sorta like an alan wrench but has a screw driver end on it. That tool is more usefull than you can imagine. Here it is

03-03-2003, 04:43 PM	#11
gregsr20 Zilvia Member Join Date: Jan 2003 Location: SAVANNAH, GA. Age: 42 Posts: 155 Trader Rating: (0) Feedback Score: 0 reviews	sears rachet driver, 9.99, comes in phillips and flathead 3 different sizes for each __________________ fast cars are dangerous, save lives drive HONDA'S

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode