Wiring Question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

BoxMan · 03-01-2009, 03:09 PM

There's a broken connector coming from the wire harness going into my intake manifold (sohc) and it's not making any contact at all. Then my car ceased to start. I replaced the connector but i did a rookie at job at it. Before I go soldering stuff in, here's my question:

Would that bum wire/connector going into the right side of the intake manifold prevent my car from starting??

It's an '89 by the way.
Thanks.

projectRDM · 03-01-2009, 03:23 PM

Picture? Size, shape of connector? Color of wire? Anything?

BoxMan · 03-01-2009, 11:01 PM

Quote:

Originally Posted by projectRDM

Picture? Size, shape of connector? Color of wire? Anything?

Alright, I'll get some pics but tomorrow, its a bit too dark outside.
It's a little brown connector. I don't know the sizes, but I'd say medium, cause there are really small connectors and really big connectors. This one is in between. It's got two wires coming out of it. One black, one black W/brown stripe. I shall have pics for clarity.

TheXFlames · 03-01-2009, 03:44 PM

Is it straight into the manifold? cause you can also check if the MAF is connected correctly

i heard if that one is plugged in correctly it wont start.

03-01-2009, 03:09 PM	#1
BoxMan Leaky Injector Join Date: Oct 2008 Location: Rialto, CA Age: 35 Posts: 149 Trader Rating: (2) Feedback Score: 2 reviews	Wiring Question There's a broken connector coming from the wire harness going into my intake manifold (sohc) and it's not making any contact at all. Then my car ceased to start. I replaced the connector but i did a rookie at job at it. Before I go soldering stuff in, here's my question: Would that bum wire/connector going into the right side of the intake manifold prevent my car from starting?? It's an '89 by the way. Thanks.

03-01-2009, 03:23 PM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Picture? Size, shape of connector? Color of wire? Anything? __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-01-2009, 03:44 PM	#4
TheXFlames Zilvia Member Join Date: Oct 2008 Location: Los Angeles Age: 36 Posts: 159 Trader Rating: (4) Feedback Score: 4 reviews	Is it straight into the manifold? cause you can also check if the MAF is connected correctly i heard if that one is plugged in correctly it wont start.