![]() |
|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Zilvia Member
![]() Join Date: May 2004
Location: Fresno, CA
Age: 38
Posts: 165
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
![]() ok, so ive been searching for like a week for this, and normally i wouldnt post, which explains my low post count, but this is starting to bug the crap out of me.
I installed some stance coilovers on my s13 about two weeks ago, and i love em, but the front ones are giving my some problems. for instance, when u turn the steering wheel, where is the coilover supposed to rotate? Ide imagine it rotates in the ball joint or whatever in the camber plate, but mine is just rotating around the bottom of the spring. The spring perch and lock are locked to the body of the coilover, but the spring doesnt rotate, it stays still and the perch rotates underneath it. (i just lifted the dust boot, and saw the threaded body of the coilover is rotating around the piston, while the piston stays stationary.) It bugs me while driving because it makes a springy noise while turning, as if you hit the spring with something hard. (i know other people have had the same noise, found them in search) When i first started getting this sound, i found a thread where someone suggested tightening the top nut on the coilover, which i found was pretty loose, so i tightened it. The sound went away, but now its come back. I cant really tighten the top nut any more cause it wont move. can it be too tight? Should i perhaps just lube the ball joint or whatever up top? I can get a video of it doing its thing if it'll help decipher my problem. |
![]() |
![]() |
Sponsored Links |
![]() |
#2 | |
Leaky Injector
Join Date: Mar 2003
Location: Central Pennsylvania
Age: 50
Posts: 99
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
First, zip the top nuts a bit tighter with an air impact... you really can't torque those top nuts correctly without something to stop the shaft from turning, so that's the next best thing. Second, you need some preload on your front springs. Two full turns at a minimum, assuming your stance are threaded like my KTS... just back the lower perch down, run it up snug on the spring by hand, then use the perch spanner to give it two more full turns. The spring should NOT rotate on the perch when turning your wheels... As far as lube? Not sure, depend on the materials involved... maybe someone with more experience with stance can chime in? |
|
![]() |
![]() |
![]() |
#3 |
Zilvia Addict
![]() Join Date: Nov 2005
Location: Downingtown, PA
Posts: 890
Trader Rating: (5)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 5 reviews
|
That's exactly what I would do....
Preload the springs slightly (basically until you can not move the spring on the perch) Tighten top nut if preloading doesn't help.
__________________
|
![]() |
![]() |
![]() |
#4 |
Zilvia Member
![]() Join Date: May 2004
Location: Fresno, CA
Age: 38
Posts: 165
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
ah, i guess i forgot to mention i already have some preload...probly around 1cm of preload measuring from where the perch touched the spring to where the perch is now. Not really sure how many turns that was, but it was a few.
|
![]() |
![]() |
![]() |
#6 |
Post Whore!
![]() Join Date: Jul 2002
Location: Girls pee-pee when they see me
Age: 41
Posts: 4,084
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
On my tein HA there were some thin plates on top of the spring and between the camber plate. I kind forgot to put them in and now mine do this too. I was kinda worried about it cause i need to raise my car a little so there will not be as much preload as before. I guess I can always take it apart and put them in
|
![]() |
![]() |
![]() |
#7 | |
Zilvia Junkie
![]() Join Date: Apr 2003
Location: Cary, NC
Age: 49
Posts: 362
Trader Rating: (0)
![]() ![]() Feedback Score: 0 reviews
|
Quote:
That's an EXTREMELY, (LET ME EMPHASIZE EXTREMELY) BAD thing to do to a strut.
__________________
Jason '95 240sx SE |
|
![]() |
![]() |
![]() |
#10 |
Leaky Injector
Join Date: Nov 2006
Location: Gainesville/Clearwater, FL
Age: 39
Posts: 88
Trader Rating: (1)
![]() ![]() Feedback Score: 1 reviews
|
My stances did it randomly when I first got them. Like if I turned the wheel all they way on a really cold day. Other than that they're fine.
__________________
|
![]() |
![]() |
![]() |
#11 |
Zilvia Member
![]() Join Date: May 2004
Location: Fresno, CA
Age: 38
Posts: 165
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Ok, so i think every time the spring shifts, its messing with my preload....or causing the spring to get wound up and try to rotate the caliper. When i turn and the spring moves, the car will start pulling in the direction i turned. If i turn the other way, it'll pull that way.
|
![]() |
![]() |
![]() |
#12 | |
Post Whore!
![]() |
Quote:
|
|
![]() |
![]() |
![]() |
#13 |
Zilvia Addict
![]() Join Date: Jan 2007
Location: Western Mass
Age: 38
Posts: 949
Trader Rating: (3)
![]() ![]() ![]() ![]() Feedback Score: 3 reviews
|
so theoretically if you turn it back straight, it'll keep going straight... no problems, just let them break in
__________________
Just talking about cars, one ![]() Horsepower sells cars torque wins races -Shelby |
![]() |
![]() |
![]() |
#14 |
Zilvia Member
![]() Join Date: May 2004
Location: Fresno, CA
Age: 38
Posts: 165
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
well, sort of. After i turn and straighten the wheel, the car will keep pulling in the direction i just turned, even though the wheel is straight. Yknow, as if my alignment was jacked up (which it is, but isn't the cause of the pulling).
|
![]() |
![]() |
![]() |
#15 | ||
Leaky Injector
Join Date: Mar 2003
Location: Central Pennsylvania
Age: 50
Posts: 99
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
When Munch says: Quote:
If you have a reliable DIY method to grip the piston shaft without damaging it, please post it so we can use your method next time. |
||
![]() |
![]() |
![]() |
#16 | |
Zilvia Junkie
![]() Join Date: Apr 2003
Location: Cary, NC
Age: 49
Posts: 362
Trader Rating: (0)
![]() ![]() Feedback Score: 0 reviews
|
Quote:
If you impact the top nut, you risk damaging the seal that keeps the struts from leaking. If the strut has an adjuster mechanism that is accessible from the top of the strut, then you also risk breaking that rod that runs through the shaft. To the original poster. The top hat needs to be able to rotate without binding. Jack the car up and watch your suspension as the steering wheel turns, you'll see why. If it's binding, something is wrong, and needs to be fixed since you could also be binding the strut shaft.
__________________
Jason '95 240sx SE |
|
![]() |
![]() |
![]() |
#17 |
Zilvia Member
![]() Join Date: May 2004
Location: Fresno, CA
Age: 38
Posts: 165
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Ok so im getting pretty ticked off at these things.
After searching the other day for like 2 hours on various forums, i found a few suggesting lubing the ball joint at the top. So today i bought some white lithium grease and lubed up both ball joints pretty well...moved the strut around while it was still attached to the top so i could get at all of the ball joints. The strut is still refusing to rotate at the ball joint, and instead, the threaded shock body rotates around the piston. Im beginning to think ide be better off just trying to get another pair for the front. |
![]() |
![]() |
![]() |
#18 |
Leaky Injector
|
have you contacted the manufacturer or atleast the distributer...they may have some recommendations for you also this way they are aware of the problem and will be more apt to suit your needs if you are unhappy after a few attempts at solving the issue. just some food for thought -Chez
BTW: I rebuild motorcycle forks at work all the time and I use a 3/8 cordless impact to take them apart as well as tighten them back up and as long as your carefull around the dampening rod you will have no ill affects. just as long as you dont sit there and spin the shaft once the nut is tight. just give it a few short bursts about a second long...that is if the person you talk to says to try and tighten the upper nut...
__________________
Originally Posted by ixfxi Stick with high quality italian made rotors, and you dont have a problem. Go with cheap, made in china bullshit.. and like most of anything made in china, you end up with fried rice. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#19 |
Leaky Injector
Join Date: Nov 2005
Location: Littleton,co
Age: 39
Posts: 95
Trader Rating: (1)
![]() Feedback Score: 1 reviews
|
my Stance's sometimes make the sprighy noise during slow turns...
also i cant seem to loosen the actual coilover to try to lower it... its jammed that spanner wrenches bend so i tried usuing some channel locks, and still cant get them to turn... idont nkow if i like stance coil overs anymore ;( |
![]() |
![]() |
![]() |
#20 | ||
Leaky Injector
Join Date: Mar 2003
Location: Central Pennsylvania
Age: 50
Posts: 99
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Quote:
Quote:
|
||
![]() |
![]() |
![]() |
#21 |
Zilvia Member
![]() Join Date: May 2004
Location: Fresno, CA
Age: 38
Posts: 165
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
Ok...so running more then a few mm of preload is for losers.
I emailed stance the other day to see if they could suggest something to help me out. In their meager 3 sentence reply, they suggested i torque the top nut to 55 lbs, and that the coilovers dont need any preload. I had about 1cm of preload, so today i torqued the top not properly, and set the preload to maybe 2mm from when the mounts contact the spring. Afterwards, the annoying spring noise was reduced. The noise isnt completely gone, just masked somewhat. Because of the less preload, there isn't as much pressure on the spring when it jumps in the perches, so it doesnt make as much noise. At least now i can drive my car without feeling like a dingus everytime i turn with that stupid loud popping noise. The front of the car also feels a bit softer now, not to mention i think it got even lower. Im still concerned that the ball joint still wont rotate, and the threaded body is still rotating around the stationary piston, but i cant think of anything else that could possibly fix my problem. BTW, for people looking for how to torque the top nut without the piston spinning. The way i did it was i got one of my spanner wrenches, put it in position on the upper spring perch, and wedged it up against the wall of the area where the shock goes. The wrench stops the piston from rotating so u can torque away. |
![]() |
![]() |
![]() |
#22 |
Zilvia Junkie
![]() |
just something you may want to check is the how your struts are going through the 3 holes up top. if you look at it closely, there is only one way to correctly put it in, i havent checked to see if it will go in any other way but it is worth a shot checking them. hopefully this made sense.
|
![]() |
![]() |
![]() |
#24 |
Zilvia Junkie
![]() Join Date: May 2005
Location: Montreal, Quebec, Canada
Posts: 401
Trader Rating: (3)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 3 reviews
|
Mine do it to, I've only had them in for 5 days or so and have only driven abour 300miles on them, but they make the sound, I checked them and same thing, the shock rotates instead of the pillowball mount. Also, my mounts were extremily stiff when I first got them, I couldn't barely move it even when the top plate was bolted to to the car.
__________________
-1992 Nissan 240SX LE -1998 Jeep Grand Cherokee 5.9 Limited |
![]() |
![]() |
![]() |
#25 |
Zilvia Junkie
![]() |
ive been daily driving on them for the past 3 months or so and they still make the sound. ive tried everything i could think of to remedy it, but it is still terrible. im still waiting for stance to get back to me which has almost been a week now... needless to say, fuck the hype, i'm never buying anything of theirs again.
|
![]() |
![]() |
![]() |
#26 |
Zilvia Junkie
![]() Join Date: May 2005
Location: Montreal, Quebec, Canada
Posts: 401
Trader Rating: (3)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 3 reviews
|
How can they sell us this crap? We should start a class action law-suit.
__________________
-1992 Nissan 240SX LE -1998 Jeep Grand Cherokee 5.9 Limited |
![]() |
![]() |
![]() |
#27 |
Zilvia Member
![]() |
Installed my GR+Pros this weekend and they are doing the same thing. Lubed the ball joints with lithium grease with no improvement. Springs are preloaded two full turns, as specified in the provided instruction sheet. Still need to torque the top nut. I'll post an update if I see any changes.
Do all Stance coilovers do this or are we just getting a bad batch? Also, as far as impacting the top nut, I'm not saying I'm for or against it, but SPL's instructions for their KTS coilovers say to impact it on a light setting: http://www.splparts.com/doc/SPLCoilover/default.htm |
![]() |
![]() |
![]() |
#28 | |||
Zilvia Junkie
![]() |
Quote:
here is my review that i have done on 240sxf. Quote:
Quote:
|
|||
![]() |
![]() |
![]() |
#29 |
Nissanaholic!
![]() Join Date: Aug 2003
Location: Los Angeles/Berkeley, CA
Posts: 2,238
Trader Rating: (1)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 1 reviews
|
Nemeguero has the same problem with his GR+'s, and he bought his months ago.
hmm.
__________________
Petition Nissan to Make the IDx on http://IDxClub.co ! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|