Really boned my timing belt - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Folken · 04-21-2009, 05:09 PM

okay so I replaced my HG and my did the timing belt on my ca18det, i go to crank it and she just cranks, I go to check the timing and the new belt is toast, the teeth are just destroyed for the most part, I have someone crank the car so i can look at the cams and they aren't moving but u can see the crank pulley, sprocket, w/e is spinning, anyone have a clue what I fucked up? btw the Timing was dead on and i torqued the camshafts down to spec

04-21-2009, 05:09 PM	#1
Folken Leaky Injector Join Date: Feb 2006 Location: Cherry Hill Area, NJ Age: 40 Posts: 142 Trader Rating: (0) Feedback Score: 0 reviews	Really boned my timing belt okay so I replaced my HG and my did the timing belt on my ca18det, i go to crank it and she just cranks, I go to check the timing and the new belt is toast, the teeth are just destroyed for the most part, I have someone crank the car so i can look at the cams and they aren't moving but u can see the crank pulley, sprocket, w/e is spinning, anyone have a clue what I fucked up? btw the Timing was dead on and i torqued the camshafts down to spec __________________ The beatings will continue until moral improves

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode