300zx bmc fitting - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gsn0526 · 05-28-2009, 12:15 AM

i have a 17/16 bmc for my 240 that i put the 300zx brake conversion on and for the middle fitting i put the fitting from the old bmc in the new one but the line nut wont even start in the middle hole but they work perfect in the other two holes has anyone had this problem or just have a solution? from what i understand it should all be 10x 1.00 mm pitch for the threads right? the fitting is fine ive tried three.

05-28-2009, 12:15 AM	#1
gsn0526 Leaky Injector Join Date: Mar 2009 Location: greensboro north carolina Posts: 115 Trader Rating: (0) Feedback Score: 0 reviews	300zx bmc fitting i have a 17/16 bmc for my 240 that i put the 300zx brake conversion on and for the middle fitting i put the fitting from the old bmc in the new one but the line nut wont even start in the middle hole but they work perfect in the other two holes has anyone had this problem or just have a solution? from what i understand it should all be 10x 1.00 mm pitch for the threads right? the fitting is fine ive tried three.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode