RTV won't stay on! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dongoesby · 07-19-2009, 03:44 AM

So I cleaned the upper oil pan today for my SR, and I put the red RTV supplied in the gasket kit from Nissan. I'm not sure if I put on the RTV right because it is my first time doing it. As told by the FSM, I put 5mm RTV in a continuous form; however, about 1 hour later, I see the RTV that compressed out on the edge has became solid and fell fall. It separated from the rest.

Did I put too much? Is this okay? I'm sure I torqued them right.

07-19-2009, 03:44 AM	#1
dongoesby Zilvia Addict Join Date: Mar 2007 Location: San Francisco Age: 38 Posts: 756 Trader Rating: (17) Feedback Score: 17 reviews	RTV won't stay on! So I cleaned the upper oil pan today for my SR, and I put the red RTV supplied in the gasket kit from Nissan. I'm not sure if I put on the RTV right because it is my first time doing it. As told by the FSM, I put 5mm RTV in a continuous form; however, about 1 hour later, I see the RTV that compressed out on the edge has became solid and fell fall. It separated from the rest. Did I put too much? Is this okay? I'm sure I torqued them right.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode