NJ Lots of 240sx upgrade parts F/S

[DoriDoriw00]

All items listed I prefer local pickup on (especially the heavy ones!)
I am willing to ship though, at buyer's expense. Reasonable offers accepted. E-Mails/paypal to [email protected]

Located in Cherry Hill, NJ

R32 R200 VLSD diff -$300

with 4.4 final and 5 point axles. This includes brand new OEM Nissan hardware for attaching axles to half shafts, AND the plastic gear to correct your speedo (which is like $30 something by itself) this is non-ABS.


COMPLETE 30MM ALUMINUM 300zx Brake upgrade kit -$500

All seals work great. Pads are OEM replacements and have about 90% left on them. MC is the larger 1 1/16 and was purchased brand new with 3 nipples for non-ABS cars. Lines are Agency Power. Rotors are Brembo. Everything used for only 1200 miles!


Nismo Power Brace - SOLD

This was also used for about 1200 miles. Straight and ready to go.


NISMO Trans Mount w/ OEM HARDWARE -$40

Fits any SR20/KA24/CA18. Will work great, used for only 3500 miles. Hardware alone was quite expensive.


TEIN tie rods and ends w/ uncracked boots - SOLD

Used for about 5000 miles.


OEM REAR LCA'S w/ RS-R Poly Bushings and S13 uprights fitted with complete RS-R Poly bushings - SOLD
Used for about 5000 miles.


H&R 15mm spacers with extended studs - ONE SET SOLD. Other still available for $80


ICHIBA Rear 5-Lug conversion hubs -$120
Used for about 1200 miles.


ATTAIN Front S13 5-Lug conversion hubs - $300
Quality made in Japan hubs. Theres a noticeable quality difference between these and the Ichibas. Also used for about 1200 miles

Front Uprights can be had for $30