Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 11-09-2009, 12:00 PM   #1
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
s13 blacktop sr wont boost? please help

okay so i have an s13 blacktop sr, i was running 11lbs on the stock t25 for at least a month until one day i was ripping it on the highway threw it into fifth and lost all power if i stepped on it, the car sputters and you can hear the turbo trying to spool but nothing, my gauge reads probably ~2lbs max. so i figured i blew my turbo beating on it, so i ordered a rebuild kit and then pulled the turbo, it didnt feel like it had much shaft play to begin with but i brought it to a shop and they tested it and it was still perfect. so no idea what it could be, i changed the plugs because my car has fouled them before. any input is greatly appreciated. thanks.
Destructodc74 is offline   Reply With Quote
Sponsored Links
Old 11-09-2009, 12:08 PM   #2
s14unimog
Nissanaholic!
 
s14unimog's Avatar
 
Join Date: Dec 2003
Location: In a place, near a river, over a lake
Age: 38
Posts: 2,415
Trader Rating: (22)
s14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond reputes14unimog has a reputation beyond repute
Feedback Score: 22 reviews
Send a message via AIM to s14unimog
^ for one, never start with " I think I blew the turbo" It would never stop blowing air if its blown, unless it has locked up. Second, I would have looked for a popped off inter-cooler coupler. You may have ripped one too. check the charge system for leaks.
__________________
Fu*king ginger bread man stole my wallet...

SHIFTlock_slide to side

d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson
s14unimog is offline   Reply With Quote
Old 11-09-2009, 12:13 PM   #3
clark
Zilvia FREAK!
 
clark's Avatar
 
Join Date: Mar 2008
Location: new york
Posts: 1,035
Trader Rating: (1)
clark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfection
Feedback Score: 1 reviews
alright, check and replace cheap stuff....check vac lines, and like s14unimog said, really sounds like you blew a pipe or something. I've done that...it's like your engine got punched in the stomach.

problem sorta seems like fueling, but how about a better interpretation of the current problem, we know what happened, when it happened, but what's it like now...does it idle normal? does it sputter through the RPM band?

video?
clark is offline   Reply With Quote
Old 11-09-2009, 12:22 PM   #4
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
it starts up and idles fine, revs perfect all the way to redline sitting in neutral but as soon as you put a load on it it sputters hard exactly when boost should be kicking in, i havent checked for leaks yet although i know its the obvious thing do to, and that could be it, when i step on it i usually get a small cloud of black smoke.
Destructodc74 is offline   Reply With Quote
Old 11-09-2009, 12:30 PM   #5
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
ill try to get a video up but whats an easy way to test for boost leaks?
Destructodc74 is offline   Reply With Quote
Old 11-09-2009, 12:52 PM   #6
clark
Zilvia FREAK!
 
clark's Avatar
 
Join Date: Mar 2008
Location: new york
Posts: 1,035
Trader Rating: (1)
clark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfectionclark is close to perfection
Feedback Score: 1 reviews
Quote:
Originally Posted by Destructodc74 View Post
ill try to get a video up but whats an easy way to test for boost leaks?

there are only so many places the boost leak could be. hotpipe from turbo to ic, cold pipe from ic to tb.

check clamps and your boost couplers.
clark is offline   Reply With Quote
Old 11-09-2009, 01:05 PM   #7
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
thanks. tommorrow i think im going to make a diy boost leak tester and get a good idea. i really hope thats the problem
Destructodc74 is offline   Reply With Quote
Old 11-10-2009, 09:33 AM   #8
conrad_s13.5
Zilvia FREAK!
 
conrad_s13.5's Avatar
 
Join Date: Jan 2009
Location: STL
Age: 37
Posts: 1,533
Trader Rating: (6)
conrad_s13.5 is making a name for him/her selfconrad_s13.5 is making a name for him/her self
Feedback Score: 6 reviews
does it sound like you have an exhaust leak!? check the manifold too man,... could have came loose or got a leak there.
__________________
cONtRol FReAkS
conrad_s13.5 is offline   Reply With Quote
Old 11-10-2009, 02:04 PM   #9
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
no exhaust leak im positive of that, i just pulled apart the whole setup yesterday and put everything back together with copper gasket sealant. im gonna attempt to check for boost leaks soon.
Destructodc74 is offline   Reply With Quote
Old 11-11-2009, 02:18 AM   #10
S13 curtis
Zilvia Addict
 
S13 curtis's Avatar
 
Join Date: Jun 2008
Location: Orlando,FL
Age: 34
Posts: 651
Trader Rating: (13)
S13 curtis is an unknown quantity at this point
Feedback Score: 13 reviews
what is the vacume at idle?
S13 curtis is offline   Reply With Quote
Old 11-11-2009, 06:58 AM   #11
Destructodc74
Zilvia Junkie
 
Join Date: Aug 2009
Location: ny
Posts: 442
Trader Rating: (7)
Destructodc74 is an unknown quantity at this point
Feedback Score: 7 reviews
wow, it was a boost leak, somehow one of the clamps slipped under the coupler at the intake manifold.... i feel like a dumbass for tearing my setup apart to find it when it was so simple. thanks everyone.
Destructodc74 is offline   Reply With Quote
Old 11-11-2009, 07:36 AM   #12
S13 curtis
Zilvia Addict
 
S13 curtis's Avatar
 
Join Date: Jun 2008
Location: Orlando,FL
Age: 34
Posts: 651
Trader Rating: (13)
S13 curtis is an unknown quantity at this point
Feedback Score: 13 reviews
sweet!!!!!
S13 curtis is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:44 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net