doch swap cranks but not starting

[marveezee]

finished swapping the major parts and found that the wiring was correct. Even fixed the wire that tricks the car that its in park. But everytime I try to start my car, it just cranks but won't fully turn on.

Could it be the distributor?
*I was told and read that it had to cylinder one had to be compatible to #7 etc. but there is a spark
*Was also told that when taking off distributor that I should reset the timing, is that correct?


Other choices are the timing being off/fuel injectors being clogged. Will try those options today... but any word of advice would be a great. thanks guys.