CT WTT KA Koyo Rad. for S14 SR20 Koyo Rad - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240sx354 · 04-21-2010, 05:20 PM

Hey, i have a used koyo radiator for a KA...i swapped in an S14 SR20 and im looking to trade the radator plus cash if needed for an SR20 Koyo Radiator...i need to get the right one so i can mount my new BOV on the Cold pipe. Radiator is in good condition, has had to be repaired once because i accidently drilled a hole into one of the tubes but there is no leaks.

nismo91blk240sx · 04-21-2010, 06:07 PM

is there a difference between s13 and s14 sr koyos?

i have one for an sr and i need a ka koyo

240sx354 · 04-25-2010, 11:27 AM

the only differences between them is that the top posts on the S14 radiator are out towards the edge a little more and the outlet where the cap is to run the hose over to the overflow is on the other side...

04-21-2010, 05:20 PM	#1
240sx354 Leaky Injector Join Date: Nov 2008 Location: CT Age: 37 Posts: 132 Trader Rating: (3) Feedback Score: 3 reviews	WTT KA Koyo Rad. for S14 SR20 Koyo Rad Hey, i have a used koyo radiator for a KA...i swapped in an S14 SR20 and im looking to trade the radator plus cash if needed for an SR20 Koyo Radiator...i need to get the right one so i can mount my new BOV on the Cold pipe. Radiator is in good condition, has had to be repaired once because i accidently drilled a hole into one of the tubes but there is no leaks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-21-2010, 06:07 PM	#2
nismo91blk240sx Zilvia Member Join Date: Jan 2008 Location: Elkhart, IN Age: 36 Posts: 293 Trader Rating: (22) Feedback Score: 22 reviews	is there a difference between s13 and s14 sr koyos? i have one for an sr and i need a ka koyo

04-25-2010, 11:27 AM	#3
240sx354 Leaky Injector Join Date: Nov 2008 Location: CT Age: 37 Posts: 132 Trader Rating: (3) Feedback Score: 3 reviews	the only differences between them is that the top posts on the S14 radiator are out towards the edge a little more and the outlet where the cap is to run the hose over to the overflow is on the other side...