Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-11-2010, 09:22 AM   #1
AceEaston
 
AceEaston's Avatar
 
Join Date: Apr 2010
Location: Augusta, GA
Posts: 7
Trader Rating: (0)
AceEaston is an unknown quantity at this point
Feedback Score: 0 reviews
s13 New 240sx, faulty wiring strikes again

Hello,

I recently purchased another Nissan 240sx and like most I see somewhere along the line some douche bag decided it would be a good idea to wire up a system and fuck everything up electrically. Well, when I first bought the car it needed an alternator fuse. The previous owner thought it was the alternator but I knew it was the fuse from how he described it, sure enough that fuse started the car.

Since then the car won't start unless you press the clutch switch and repeatedly turn the key until it cranks which becomes very tiring or you pop the clutch which is much easier obviously. The car has a brand new starter and I tested it, it's good. A friend of mine had this EXACT same issue; one day, he went through some stray wires from an old system they had hooked up. He disconnected a stray wire from his battery terminal and just like that the car fired up every time and no longer had the issue. I've searched for stray wires myself and can't find anything that would prevent the car from starting.

Yesterday I went around the corner to put some gas in the car. When I walked out of the gas station I smelled something burning and noticed traces of smoke coming from under the hood. I immediately popped the hood and to my surprise a small flame had combusted via some wires located by my factory air intake. I immediately put the fire out and discovered there was no damage done other than the ends of the wires being fried and a small trace of melted plastic (harmless) by my heatshield. At any rate I was reluctant to start the car so I rolled it downhill and coasted most of the way home, popped the clutch and drove it uphill to my house and parked it, checked the wires, they seemed fine.

Today I was going to get the car looked at. I put some electrical tape around the burnt wires to ensure they wouldn't short out again. I rolled it downhill, same as always, went to pop the clutch and failed three times. I got to the bottom of the hill and said "fuck it" and parked the car in a safe place next to the curb. I hooked up jumper cables to ensure it wasn't the battery (the hot sun was messing with my thinking a bit, of course it wasn't battery related). I got the car to turn over once but it wouldn't crank, and giving it gas did nothing.

If anyone can provide ANY feedback on this I'd appreciate it very much as it is a dream car and I don't want to see it go up in flames. Can send pics upon request.

Thanks.
AceEaston is offline   Reply With Quote
Sponsored Links
 

Bookmarks

Tags
240sx, electrical, nissan, wire, wiring


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:17 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net