j30 help

[logo20]

ok i'm trying to figure this out it was posted by somebody in this board but i don't get it.

With a VLSD with the ABS sensor on the front the trick with the driveshaft is to reverse your driveshaft bolts. i.e. the driveshaft bolts are collared on the diff side i.e. a smooth surface with no threads it is exactly long enough that if you put the bolts in backwards i.e. the collar on the driveshaft side it pulls the driveshaft back just far enough for clearance.

also, how much fluid do i put in the j30 vlsd?
thanks in advance.