mazworks

[projectdrifter]

placed my order stuff was hear 2 days later everyting went smooth and fast. great guys great product.

[ronmcdon]

ordered an s14 subrame reinforcement plate from them recently. part was reasonably priced, quality was good, and shipping was fast. great merchant!

[street240]

Originally Posted by projectdrifter

placed my order stuff was hear 2 days later everyting went smooth and fast. great guys great product.

I am curious, what did you get from them?

[Yoshi]

Originally Posted by street240

I am curious, what did you get from them?

This is the sort of thing that cloggs these threads man, u should use PM, it'll get you an answer faster anyhow.

[projectdrifter]

i got flanges. sr ex manifold flange, t4 flange, and i am waiting on the 38mm waste gate flange i had talked 2 them about it. so they even communicated well.

[O3DigitalBath]

just so no one asks...

http://www.mazworx.com

and

http://www.mazworxracesupply.com/

yea I know its pretty easy...but I wouldn't put anything past some of the members here.

[projectdrifter]

Originally Posted by O3DigitalBath

just so no one asks...

http://www.mazworx.com

and

http://www.mazworxracesupply.com/

yea I know its pretty easy...but I wouldn't put anything past some of the members here.

if i recall do not use the www.mazworksracesupply.com one. a guy named james ran it and mazworx no longer uses him as a distributor. not sure if they have not their new store up yet. i am still trying to get my tial 38 wg flange. i figured we were in contact no worries but its been a few months now and i have emailed and talked to james directly. i will keep this as up 2 dayte as possible with my conclusion

[projectdrifter]

my issue was resolved. product was recieved. i will do business agn.

[projectdrifter]

did business agn this time it was machine work.i was having issues with my fuel system not sealing. after market sheet metal manifold. mark ended up having to make an iacv flange, weld and re mill the injector holders in the manifold, built a tb cable bracket, remake a q45tb flange and tap it. he also bored out my fuel rail and installed injectors insuring a prefect seal. all welding was aluminum and was spot on. very clean work. turn around time was also prompt. and pricing was great 4 all the work i expected the bill to be more. agn i will do more business.
already have. i needed a fitting made for my t4 drain. had one laying around so he shipped priority. part will be hear in 2 days. i got tracking number as well. stand up shop and guy.

[Krimlin]

I made a new thread since the old one from 07 was very limited with information.

Company: Mazworx (www.mazworx.com)
Review: Very displeased

Issues:
1. My shipment did not come with the Dakota recaibration kit as ordered. Upon calling, my money was refunded without a choice.

2. When the kit came in upon inspection, I could see that the pieces that were cut with a CNC plasma cutter or similar device, and the person operating this machine did not know how to make clean cuts. i.e. The cuts were started from the ouside and made a circle leaving a nasty notch where the cut was started.

3. After the motor and the car were delivered to the shop, I was still waiting on the 4 plugs to come in, at that time I called up there to get an estimate on the turn around time, at 3pm on a Monday my call was sent to voice mail, on second call back I got an answer but no responce from the other end but could hear noises in the backround like someone picked it up and set it down. On the third call someone picked up and I aksed how long the wiring conversion would take when they got it, his reply "Uhhh like a week." That sounded good so I was happy. Then I get a phone call a week later, "Ahh hi, this is ****** (Don't remember) from Mazworx, we have a package that came in and we don't know what it's for" So I explained what I sent it in for, and he seemed dumb founded like he had never heard of a KA-VH harness conversion. Then I ask when should I be expecting the harness to come in? "In about 3 weeks."...

4. After the harness came in and SSA started the work I get a call from them asking if I had the ABS removal kit. I replied no, and they said they were having trouble with the motor clearing and called Mazworx. Mazworx told them that they'd have to buy their ABS removal kit for like $300, which I was getting pretty upset with them (Mazworx) at this point. Because no where in their installation guide it tells about buying or having an ABS removal kit...

5. Upon the test fitting of the motor came sucsessful after dropping even more money for a ABS delete. Then came time for chassis prep, ANOTHER call from SSA hey just wanted to let you know that the template for the gusset for the alternator is not in the packet. I called Mazworx again and to my relief someone picked up the phone that knew what I was talking about, I explain the problem and asked them to email the template to SSA. A day goes by and no email, at this point I really don't want to deal with them in fear I would pop off about their mess ups. I called again after cooling off, and the guy agreed to fax it, 4 hours later a fax comes in and it's about 1/8th the original size, so another call and the guy sends and other fax in a timely manner but it's so large that it took 2 pages, half on one page and the other half on the other page, but it works...

6.. After installation of the motor, I got another call saing that the motor mounts are wrong, and that they've tried them every which way, but the circular plates are at the wrong angle and this is the lowest they'll go.
Picture for refrence: YES I KNOW WELDED IS SPELLED WRONG.


7. Finally the motor is in and turns over, well after the installation of the Mazworx jumper harness things start to foul up. Once we put it all in there were plugs on the jumper harness that didn't match up to the chassis harness nor the engine harness... I was lost and pissed. Well we plugged up the harness to the plugs that matched and all the grounds up, try and turn the car over on it's own and NOTHING happened. After being charged for wiring diagnostic to fix the problem, TO MY SUPRISE it was Maxworz's fault. The relay they sent with their harness was bad, and another $200 down the drain for a bad relay. The wiring guy calls Mazworx to get a replacement, and they have not a clue what he is talking about. and he told me he outsourced the relay from somewhere else.

8. Once everything was done and final hook up of everything we found some vaccum lines that didn't reach to the intake and what not, just little problems that put the icing on the cake.

Cliffs:
Missing parts on order
Bad customer service
No mention of ABS removal
Unknowledgeable staff
Poor CNC plasma cuts
Shipping issues
Missing parts on installation guide


* This post is not ment to start any drama, and if Mazworx feels they need to right this wrong, that would be great.

Negative Review notification sent to Mazworx account on here. 08/13/2010
08/23/2010 - Information posted on different forums after 10 days of no reply
08/23/2010 - Email sent to Mazworx's site notifying them of a negative review

[Krimlin]

After 10 days of no reply from Mazworx, I feel they do not wish to right the wrong. Now I will be making the information plublic on all forums.

[cc4usmc]

They did reply, it was deleted per the rules.

Originally Posted by Jeff240sx

The reviewee SHOULD NOT be posting in their thread. We are having three major issues with this at the moment:
DO_NOT post in any thread reviewing you or your business.

They probably don't know their post was deleted, which is why you haven't been contacted directly.

[Krimlin]

Originally Posted by cc4usmc

They did reply, it was deleted per the rules.




They probably don't know their post was deleted, which is why you haven't been contacted directly.

Thanks for the information!