TX HUGE 240 sx part out any thing you ever dreamed of

[cutter]

pictures will be up soon

1989 nissan 240sx coupe
full sr swap includes
-stock short block with new s14 oil pickup, new timing chain, new water pump, new front cover, true TRUST sr20det oil pan,

-head- bc stainless intake valves, bronze exhaust valve guides, new steel intake valve guides, new oem valve stem seals, bc valve spring, 01 infiniti g20 hydraulic lifters, 99 se-l rocker arms machined to fit notched shims on both sides, arp head studs cometic metal headgasket, bc stage 2 cams 264* duration. head is ready to rev to 9000 rpm.





-hks gt 2540 ball bearing turbo good to around 350 hp--800

-greddy intake manifold-300

-rc engineering 750cc top feed injectors high impedance no resistors needed-200

-jgy top feed fuel rail-50

-power fc d-jetro-775


-spec 10lb flywheel-100

-act 6 puck clutch-75

-blitz front mount ic setup-200

-greddy type rs bov-100

-s13 5 speed transmission

-equal length tubular exhaust manifold
-big ss 02 housing
----4700 for the complete swap with everything i will part certain thing out and if you want to spend less you can take some items off. i will put a warranty on the engine if you buy it. the compression was right at 155 all the way across.

300zx front calipers--200
300zx rear calipers-100
300zx conversion lines-70
300zx stop tech race pads(have less than 100 miles on them)-75
300zx aluminum uprights-75
300zx rear ebrake assemblies with ebrake cables-250

fno1rc 5x114 17x8 and 17x9 +30all the way around dont have to do a mega roll to get them to fit. powder coated red. $550 no tires
koyo aluminum race radiator with flexalite electric fans-350

megan front tension arms- 50
megan rear upper control arms-50
aem uego wide band- 150
blitz black light technology boost gauge-100
greddy egt gauge-75

300 zx vlsd with axles 250
nismo 4.36 final drive 1.5 way lsd -700
sparco pro 2000 race seat -450
rci 5 spint harnesses- 50 for 2

custom made solid rear strut brace with body mounts-100
tanabe front strut bar-60
obx front strut bar -25 ( not a cheap one this one is very thick and well made)
b&m short throw shifter-$140
megan racing coil overs-700 have around 3500 miles on them
super ricer carbon fiber hood-300

shell- 89 coupe shell only has the back seat in it. also has a custom made harness bar that is removable. uncracked brown dash with digital display has full energy suspension kit installed around 130 pieces!!! took me 40+ hours to install all of these shell will come with a corbou race seat mounted on the drivers side fitted for driver. lots of nice custom stuff inside the car. it will also come with a boost, and oil pressure gauges $1000 for the rolling chassis

i have tons and tons of parts for sr20dets 2 sets of stock injectors 3 or 4 wiring harnesses a bare head, every sensor know to man. tons of mafs, if you need anything give me a call.

or i will sell everything for $7500 call chris at 903 530 9214.

Make offers the worst i can do is say no. i will also trade parts or whole car for running vehicles.