SR swap question

[JuMPiiN]

Okay I have a few questions for everyone and please help if you can.

1st - I had my harness sent to wiring specialties in CT I believe to someone named Yury, well everything was perfect on the lower harness, then the upper came and everything was working great until I ran into the TPS sensor, the wrong plug is on the new harness I'm guessing. ( my car was a automatic ) there are a few plugs like 3 or 4 on the ecu box that have no plugs to go into on the harness, the ones on the harness are female and the ones on the fuse box are female as well. I'm lost at this point and my swap is like 80% done. I can't do anything else until this is figured out.


2nd - the brace that's suppose to hold the drive shaft in place (behind the cross member and tranny mount) it's on the driveshaft itself, it's missing do I need another driveshaft or can I buy this peice from a junkyard or skmething ?

Other than the things listed above everything is done, I have nothing left besides filling it with fluids and starting it up. I'm at a stand still with the wiring though. I'm stuck.

Someone please help.