RB25 temp gauge not working!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dreamin240sx · 06-13-2012, 10:42 PM

Hey guys I have a wiring specialist harness for my RB that's in a 90 hatch. I can't seem to get the coolant temp gauge to work. I've even put a ka temp sensor in and still nothing. I've checked my wiring for the dash plug and all seems good. So is there a way that I could run a wire straight from the sensor to the gauge and see if I can get it to work? Any help would be greatly appreciated.

Rut Ro · 06-14-2012, 06:22 AM

I don't see why you couldn't try that. I assume its the one in your dash? I would grab a pin layout and see which one you have to tap into. Run a dedicated wire from the pin to the sensor. If it starts working, you have got your answer. I personally would do an aftermarket. You're working with a 22 year old cluster. Im in the same boat. Good luck.

Sileighty_85 · 06-14-2012, 09:54 AM

either contact Yuri or buy an After market Temp gauge. The stock Gauge is garbage away

greenwood · 06-14-2012, 09:57 AM

by the time your stock guage tells you that you're overheating it's pretty much too late

get an autometer or something and throw that bisch in there

06-13-2012, 10:42 PM	#1
dreamin240sx Zilvia Junkie Join Date: Aug 2009 Location: west virginia Age: 33 Posts: 531 Trader Rating: (2) Feedback Score: 2 reviews	RB25 temp gauge not working!! Hey guys I have a wiring specialist harness for my RB that's in a 90 hatch. I can't seem to get the coolant temp gauge to work. I've even put a ka temp sensor in and still nothing. I've checked my wiring for the dash plug and all seems good. So is there a way that I could run a wire straight from the sensor to the gauge and see if I can get it to work? Any help would be greatly appreciated. __________________ RB POWA!!!!!!!!

06-14-2012, 09:54 AM	#3
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	either contact Yuri or buy an After market Temp gauge. The stock Gauge is garbage away __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-14-2012, 06:22 AM	#2
Rut Ro Leaky Injector Join Date: Jun 2010 Location: Colorado Age: 40 Posts: 72 Trader Rating: (0) Feedback Score: 0 reviews	I don't see why you couldn't try that. I assume its the one in your dash? I would grab a pin layout and see which one you have to tap into. Run a dedicated wire from the pin to the sensor. If it starts working, you have got your answer. I personally would do an aftermarket. You're working with a 22 year old cluster. Im in the same boat. Good luck.

06-14-2012, 09:57 AM	#4
greenwood Zilvia Addict Join Date: May 2011 Location: nc Posts: 620 Trader Rating: (5) Feedback Score: 5 reviews	by the time your stock guage tells you that you're overheating it's pretty much too late get an autometer or something and throw that bisch in there