Rebuild Won't Start. Please Help!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

awdfury · 03-09-2011, 09:55 PM

So here is the story:

I recently rebuilt the top half of my SR20DET with HKS 264 Cams, HKS adjustable cam gears. The intake manifold and head have been port, polished and flow matched. I changed the valve springs and retainers to Greddy Springs and Titanium Retainers. The valves had a vlave grind performed and after assembly the head was pressure tested before installing it on the block.

Now that everything is back together I cannot get the engine to start.

I have tested for spark and I know the engine is getting fuel. I was able to get one puff of flame out the exhaust but other then that I cannot get the engine to turn over.

Any Ideas?

03-09-2011, 09:55 PM	#1
awdfury Leaky Injector Join Date: Jun 2006 Location: Mount Vernon, Wa Age: 41 Posts: 109 Trader Rating: (0) Feedback Score: 0 reviews	Rebuild Won't Start. Please Help!!! So here is the story: I recently rebuilt the top half of my SR20DET with HKS 264 Cams, HKS adjustable cam gears. The intake manifold and head have been port, polished and flow matched. I changed the valve springs and retainers to Greddy Springs and Titanium Retainers. The valves had a vlave grind performed and after assembly the head was pressure tested before installing it on the block. Now that everything is back together I cannot get the engine to start. I have tested for spark and I know the engine is getting fuel. I was able to get one puff of flame out the exhaust but other then that I cannot get the engine to turn over. Any Ideas? __________________ Everything happens for a reason.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode