Meters Fuse (seatbelts) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

lok · 10-08-2003, 07:13 AM

Ok, I removed all of my seatbelts not to long agon the track, the lap belt, behind the seats on the floorboard. I recently installed some 3pt harnesses and removed the female seatbelt connected to the seat. After that I started blowing my 10amp meters fuse. I reinstalled the seat belt connector and everything has been fine for about 2 weeks. Now I am blowing the fuse again. The computer box in the center console is not plugged in nor has it since I removed the auto seatbelts. I ran about six months w/o any seatbelts and had no problems. Any suggestions?

Thanks,

10-08-2003, 07:13 AM	#1
lok Zilvia Addict Join Date: Jul 2003 Location: Oklahoma Posts: 816 Trader Rating: (10) Feedback Score: 10 reviews	Meters Fuse (seatbelts) Ok, I removed all of my seatbelts not to long agon the track, the lap belt, behind the seats on the floorboard. I recently installed some 3pt harnesses and removed the female seatbelt connected to the seat. After that I started blowing my 10amp meters fuse. I reinstalled the seat belt connector and everything has been fine for about 2 weeks. Now I am blowing the fuse again. The computer box in the center console is not plugged in nor has it since I removed the auto seatbelts. I ran about six months w/o any seatbelts and had no problems. Any suggestions? Thanks,

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode