FL DEFI, Topmount SR mani, MAFs, ARP rod bolts, CAS, etc

[greenman100]

All parts located in Gainesvile, FL. I regularly visit Orlando and Tampa though, and can deliver the parts after a deposit has been made via PayPal.



Pictured:



T3 or T4 topmount ramhorn manifold, braced runners and no cracks. Flange works for T3 or T4 turbos. 38mm wastegate. - $150



DEFI BF boost gauge, with sensor. reads in PSI. $150
DEFI BF EGT gauge, without sensor, reads in degF. $80
Full set of DEFi gauges with sensors, control unit, and seven 60mm gauge pod - Boost, EGT, Oil press, Oil temp, Water temp, Fuel press. All sensors are loomed and protected. With fiberglass molded gauge housing, $1000






Aftermarket Fog Lights, used - $20/pair





Z32 MAF, $80 each ONE LEFT.




ARP Rod Bolt kit - $40






Timing Light - $25






SR20 CAS - $100





SR20 OEM pulley set - $20





3" Test Pipe - $30




Not Pictured:
S13 SR Exhaust cam - $10
Window motor - $10
S14 door handle - $10
S13 SR Alternator - $50
S14 ignition lock w/key, you will need to save the non-keyed half of the assembly, i cut mine to get it off. - $10
S14 ignition switch, uncut pigtail - $10
OEM SR20 HG, never used - $20
S13 Speed Sensor - $25