wiring in new MAF plug

[khilgers]

I'm trying to fix a MAF related problem I've been having for the last month or so and I'm going through the process of elimination and the only thing I havn't tried yet is to solder on a new Z32 MAF plug in place of my existing one.

Just wanted to make sure before I wire up the new plug that I have the wiring correct. I purchased a new MAF last year for dirt cheap just to have an extra one laying around. The only difference is that (1) has 5 connectors, and (1) has 4 connectors. I've already put both MAFS in the car and it runs fine the way the car is currently wired up, so I know that they both work.

My question is that the other plug I want to solder on has a different color configuration, which I believe shouldn't matter and I should just wire it up the same way as the one on the car currently.

A-A
B-B
C-C
D-D
E-E
F-F

Below is a pic of the 2 MAFs I have as well as the current car wiring and the new plug. Please verify that I have this right before I wire in the new one. Thanks.


The one on the left is what is currently wired to the car