Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > Local / Regional / National > USA > Mid-Atlantic States

Mid-Atlantic States DC, Delaware, Kentucky, Maryland, New Jersey, New York, Ohio, Pennsylvania, Virginia, and West Virginia.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-31-2011, 08:57 PM   #1
Dilbert11
 
Join Date: Feb 2011
Location: Norfolk, VA
Posts: 37
Trader Rating: (0)
Dilbert11 is an unknown quantity at this point
Feedback Score: 0 reviews
s14 with s14 sr20 wont stay running, and gauges dont work....helppp

ok, I have and 1997 s14 with a zenki sr20det with 480cc injector z 32 maf with stock ecu and a untuned safc 2. The car only starts if i put it on a slow charge for at least 2 days. when it starts it will idle for a few seconds then die out i can keep it running if i keep revving it up high soon as i let off of it it dies. I've tested the alternator its fine I have also checked the cas took it out and spun it injectors click fine. None of the gauges work but all the lights come on as normal, the safc 2 is reading volts and throttle position but it is not getting a tach signal. I also have the conversion harness from wiring specialities, and new fuel pump.

Need help to know where to go from here anything i can check, how to know if you have a bad ecu or could it be a bad sensor, or could the timing cause this ??
Dilbert11 is offline   Reply With Quote
Sponsored Links
 

Bookmarks

Tags
gauges, s14, sr20det, wont stay running


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:42 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net