zenki headlight problem - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

project_240 · 12-14-2003, 03:56 PM

help...i have a 95 and one of my headlights is out. now, the weird part is that when the low beam is on, it is out, but when the high beam is on, the low beam turns on along with the high beam, so the bulb itself still works. what do you think it could be? the low beam of my headlight works only when the high beam is turned on. it is just the passenger side...drivers side is fine.

-jake

**Phlip** · 12-14-2003, 07:24 PM

Replace the bulb anyway...

yudalicious · 12-14-2003, 07:39 PM

the low beam bulb actually has 2 filaments... 1 high beam 1 low beam - the low beam burned out - replace the bulb, this is normal.

BTW are you using aftermarket "xenon" bulbs? they wear out very fast.

project_240 · 12-14-2003, 07:56 PM

okay i will replace the bulbs...and no i dont use those hyperwhite bulbs. i use normal h4 ones at auto zone or whatever...its been about 2 years since i replaced them. thanks...

-jake

12-14-2003, 03:56 PM	#1
project_240 Leaky Injector Join Date: Mar 2002 Location: IE California Posts: 101 Trader Rating: (0) Feedback Score: 0 reviews	zenki headlight problem help...i have a 95 and one of my headlights is out. now, the weird part is that when the low beam is on, it is out, but when the high beam is on, the low beam turns on along with the high beam, so the bulb itself still works. what do you think it could be? the low beam of my headlight works only when the high beam is turned on. it is just the passenger side...drivers side is fine. -jake

12-14-2003, 07:24 PM	#2
Phlip Yes, I look like that Join Date: Mar 2002 Location: In my supervillain's lair Posts: 27,980 Trader Rating: (19) Rides Gallery: Phlip Feedback Score: 19 reviews	Replace the bulb anyway... __________________ Weirdo And I write too!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-14-2003, 07:39 PM	#3
yudalicious Zilvia Addict Join Date: Jun 2003 Location: Atlanta Posts: 700 Trader Rating: (3) Feedback Score: 3 reviews	the low beam bulb actually has 2 filaments... 1 high beam 1 low beam - the low beam burned out - replace the bulb, this is normal. BTW are you using aftermarket "xenon" bulbs? they wear out very fast.

12-14-2003, 07:56 PM	#4
project_240 Leaky Injector Join Date: Mar 2002 Location: IE California Posts: 101 Trader Rating: (0) Feedback Score: 0 reviews	okay i will replace the bulbs...and no i dont use those hyperwhite bulbs. i use normal h4 ones at auto zone or whatever...its been about 2 years since i replaced them. thanks... -jake