Possible Injector upgrade for sr red top? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

J.bell · 11-22-2011, 12:45 AM

Ive noticed lately my injectors are are getting really loud. I THINK there may be a 255lph pump in the car, which Ive heard shortens injector life span on the OEM 370cc's. So my question is, can I upgrade to a slightly higher cc injector, even though my engine is a basicly stock setup? the only real aftermarket engine parts are the FMIC, BOV, Boost controller, and possibly an upgraded pump. And for those of you who are fuel delivery guru's, how can I truly tell my pumps a walboro 255? Am I going to have to rip the sucker out and read the engraving on it?

Pinggg · 11-22-2011, 12:57 AM

Deatschwerks makes a 370cc replacement for SR for a very affordable price. I run there 1000cc side feed injectors for my built sr on E85.

J.bell · 11-22-2011, 01:00 AM

What about quality? Avaerage price for a set, and where can I find em?

Pinggg · 11-22-2011, 01:03 AM

Quality is top notch, very easy to tune with, good spray pattern and they are also warranty and also come with a flow chart when you buy them new. Contact BG @ Enjuku Racing and he will set you in the right direction.

Here you go.
240sx 1991-98 | 240sx | Nissan | Sport Compact | Fuel Injectors | DeatschWerks

sidewaysil80 · 11-22-2011, 01:04 AM

Quote:

Originally Posted by J.bell

What about quality? Avaerage price for a set, and where can I find em?

1. click link www.google.com
2. then type in deatschwerks injector service
3. wait for results and trial and error your way to their site
4. next click applications or product
5. search for sr20det/370cc injectors
6. add to cart
7. add shipping info for accurate price
8. fill out necessary data and click "buy"
9. enter card information (don't forget 3 digit code on back)
10. check mail box daily
11. when they arrive, use a knife and cut the tape sealing the box
12. dig through peanuts and shipping material and remove injectors
13. done

Pinggg · 11-22-2011, 01:05 AM

Quote:

Originally Posted by sidewaysil80

1. click link www.google.com
2. then type in deatschwerks injector service
3. wait for results and trial and error your way to their site
4. next click applications or product
5. search for sr20det/370cc injectors
6. add to cart
7. add shipping info for accurate price
8. fill out necessary data and click "buy"
9. enter card information (don't forget 3 digit code on back)
10. check mail box daily
11. when they arrive, use a knife and cut the tape sealing the box
12. dig through peanuts and shipping material and remove injectors
13. done

Haha couldnt have been put in a much simpler way

J.bell · 11-22-2011, 01:11 AM

Quote:

Originally Posted by Pinggg

Haha couldnt have been put in a much simpler way

yeah no kidding, some peoples children....... Anyways thanx for the info, Ill try them out.

Pinggg · 11-22-2011, 01:23 AM

Quote:

Originally Posted by J.bell

yeah no kidding, some peoples children....... Anyways thanx for the info, Ill try them out.

yeah man no point of buying use ones just save up a little more and get new, trust me you won't regret it, it'll save you tons of headace.

sidewaysil80 · 11-22-2011, 01:29 AM

Quote:

Originally Posted by Pinggg

yeah man no point of buying use ones just save up a little more and get new, trust me you won't regret it, it'll save you tons of headace.

true, but another option is to get used ones and send them deatschwers to get cleaned tested. it's about 80 bucks total including shipping. i do it with EVERY motor i get for peace of mind.

(op let me know if you need a write up on their injector cleaning service)

J.bell · 11-22-2011, 01:32 AM

yeah definately wont be buying used. Id just be throwing away nickles and dimes really, and running the risk of needlessly having to replace them again.

J.bell · 11-22-2011, 01:37 AM

80 bucks all included is good priced. Id just rather swap them out though. But I guess the other option would be more cost eficient. To grip another set, send them in then swap when I get them back. But what kind of warranty or guarentee comes with the service?

Croustibat · 11-22-2011, 06:43 AM

I never had problem with second hand injectors. I had problem with new injectors (from TLF performance ... never again). I bought a set of second hand 510cc mitsu evo injectors for 80€. With a receipt from rc engineering for flow test and cleaning.

TBH, dont worry about your injector noises. If it aint broken dont fix it. Some injectors are really noisy, and it does not prevent them from working. Changing injectors results in a remap, unless you get injectors with the very same spray pattern, flow and latency ...

!Zar! · 11-22-2011, 10:51 AM

A fuel pump won't shorten the life of your injectors.

If a fuel pump were to shorten the life of anything it would be your FPR: Fuel Pressure Regulator.

11-22-2011, 12:45 AM	#1
J.bell Join Date: Oct 2011 Location: Alberta, Canada Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Possible Injector upgrade for sr red top? Ive noticed lately my injectors are are getting really loud. I THINK there may be a 255lph pump in the car, which Ive heard shortens injector life span on the OEM 370cc's. So my question is, can I upgrade to a slightly higher cc injector, even though my engine is a basicly stock setup? the only real aftermarket engine parts are the FMIC, BOV, Boost controller, and possibly an upgraded pump. And for those of you who are fuel delivery guru's, how can I truly tell my pumps a walboro 255? Am I going to have to rip the sucker out and read the engraving on it?

11-22-2011, 10:51 AM	#13
!Zar! Post Whore! Join Date: Nov 2004 Location: North Korea Posts: 14,579 Trader Rating: (27) Feedback Score: 27 reviews	A fuel pump won't shorten the life of your injectors. If a fuel pump were to shorten the life of anything it would be your FPR: Fuel Pressure Regulator. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-22-2011, 12:57 AM	#2
Pinggg Zilvia FREAK! Join Date: Dec 2010 Location: Coconut Creek, Florida Age: 31 Posts: 1,255 Trader Rating: (22) Feedback Score: 22 reviews	Deatschwerks makes a 370cc replacement for SR for a very affordable price. I run there 1000cc side feed injectors for my built sr on E85.

11-22-2011, 01:00 AM	#3
J.bell Join Date: Oct 2011 Location: Alberta, Canada Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	What about quality? Avaerage price for a set, and where can I find em?

11-22-2011, 01:03 AM	#4
Pinggg Zilvia FREAK! Join Date: Dec 2010 Location: Coconut Creek, Florida Age: 31 Posts: 1,255 Trader Rating: (22) Feedback Score: 22 reviews	Quality is top notch, very easy to tune with, good spray pattern and they are also warranty and also come with a flow chart when you buy them new. Contact BG @ Enjuku Racing and he will set you in the right direction. Here you go. 240sx 1991-98 \| 240sx \| Nissan \| Sport Compact \| Fuel Injectors \| DeatschWerks

11-22-2011, 01:32 AM	#10
J.bell Join Date: Oct 2011 Location: Alberta, Canada Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	yeah definately wont be buying used. Id just be throwing away nickles and dimes really, and running the risk of needlessly having to replace them again.

11-22-2011, 01:37 AM	#11
J.bell Join Date: Oct 2011 Location: Alberta, Canada Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	80 bucks all included is good priced. Id just rather swap them out though. But I guess the other option would be more cost eficient. To grip another set, send them in then swap when I get them back. But what kind of warranty or guarentee comes with the service?

11-22-2011, 06:43 AM	#12
Croustibat Nissanaholic! Join Date: Aug 2011 Location: France - Toulouse Age: 44 Posts: 1,851 Trader Rating: (0) Feedback Score: 0 reviews	I never had problem with second hand injectors. I had problem with new injectors (from TLF performance ... never again). I bought a set of second hand 510cc mitsu evo injectors for 80€. With a receipt from rc engineering for flow test and cleaning. TBH, dont worry about your injector noises. If it aint broken dont fix it. Some injectors are really noisy, and it does not prevent them from working. Changing injectors results in a remap, unless you get injectors with the very same spray pattern, flow and latency ...