Ka24e<->Ka24de question. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

RR_180sx · 07-25-2006, 04:52 PM

Ok my 89 240 hatch is a single cam. i blew the bottom end and went out and bought a twin cam full motor. my question is can i put my single cam head on the twin cam block and drop it in and go?? cuz i dont want to do all the BS in making the car twin cam from single cam.

Jsal32 · 07-25-2006, 04:55 PM

its not bolt-on. its possible but it would take more work than just dropping in the twin cam engine. unless ur one bad ass machinist.

so short answer NO.

-Jose

JesusFreakDrifter · 07-25-2006, 04:56 PM

first off, the power steering setup needs to be swapped to the other side, cuz there would be no clearance, as for the ac, im not sure, or you could just go, without and drop in and go, but if you NEED luxuries then, you gonna have some fabbing to do. i think this has already been covered, whatever.

Personally i would rebuild the ka-E and turbo kit, plenty torquey

big_schaf · 07-25-2006, 05:44 PM

you also need to state if you bought a s13 ka24de or a s14 ka24de, as then you might have obd1/2 problems

BigVinnie · 07-25-2006, 11:09 PM

You would want a de block from a frontier truck in order to swap the SOHC head. Don't no why you would want to do that since sohc heads lower compression on dohc pistons and block.
Any other questions you can reach devious KA at NICO he has all the answers you need.

Rancimo322 · 12-27-2011, 09:14 PM

why the frontier block? if u dont mind me asking ?

07-25-2006, 04:52 PM	#1
RR_180sx Join Date: May 2006 Location: Illinois Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Ka24e<->Ka24de question. Ok my 89 240 hatch is a single cam. i blew the bottom end and went out and bought a twin cam full motor. my question is can i put my single cam head on the twin cam block and drop it in and go?? cuz i dont want to do all the BS in making the car twin cam from single cam.

07-25-2006, 05:44 PM	#4
big_schaf Zilvia Member Join Date: Apr 2003 Location: British Columbia Age: 37 Posts: 225 Trader Rating: (0) Feedback Score: 0 reviews	you also need to state if you bought a s13 ka24de or a s14 ka24de, as then you might have obd1/2 problems __________________ 90 s13 dd, 90 s13 track, 90 ae92 winter

07-25-2006, 11:09 PM	#5
BigVinnie Zilvia FREAK! Join Date: Apr 2003 Location: Walnut Crizzle, Crackifornia Age: 46 Posts: 1,266 Trader Rating: (0) Rides Gallery: BigVinnie Feedback Score: 0 reviews	You would want a de block from a frontier truck in order to swap the SOHC head. Don't no why you would want to do that since sohc heads lower compression on dohc pistons and block. Any other questions you can reach devious KA at NICO he has all the answers you need. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-25-2006, 04:55 PM	#2
Jsal32 Zilvia Member Join Date: Feb 2004 Location: Goleta/NoHo, CA Posts: 273 Trader Rating: (1) Feedback Score: 1 reviews	its not bolt-on. its possible but it would take more work than just dropping in the twin cam engine. unless ur one bad ass machinist. so short answer NO. -Jose

07-25-2006, 04:56 PM	#3
JesusFreakDrifter Zilvia Addict Join Date: Jan 2006 Location: fort lauderdale Posts: 975 Trader Rating: (0) Feedback Score: 0 reviews	first off, the power steering setup needs to be swapped to the other side, cuz there would be no clearance, as for the ac, im not sure, or you could just go, without and drop in and go, but if you NEED luxuries then, you gonna have some fabbing to do. i think this has already been covered, whatever. Personally i would rebuild the ka-E and turbo kit, plenty torquey

12-27-2011, 09:14 PM	#6
Rancimo322 Zilvia Member Join Date: Oct 2010 Location: Los Angeles Age: 38 Posts: 172 Trader Rating: (3) Feedback Score: 3 reviews	why the frontier block? if u dont mind me asking ?