VA Mazworx Z32/ Endless/ Koyo & Electric Water Pump/ GT28rs/ SR etc..

[pigeon]

Some stuff for sale: Located Northern VA
If you pay to ship it, then I will.
If you have questions ask.
Ill get the rest of the pictures up tomorrow.

Z32 transmission with a Mazworx adapter kit. $1500 PENDING SALE
Everything you need to run it, Adapter Plate, Bolts, Driveshaft, Starter, Shifter, etc

Garret Dual Ball Bearing 28rs with a 60 hotside. $800 OBO
It has a 4 bolt on the back with a vband adapter and a Vibrant 90 degree elbow on the cold side. Spins like a top, made 350 on a stock sr with cams @ 15psi on a Dyno Dynamics.

Endless Front calipers SOLD

FANS SOLD
Koyo by it self $200
Electirc water pump and block off plate with AN lines SOLD



Subframe things $40 PENDING

Full Race manifold for SR, T3 flange single wastegate $500 PENDING


Tial BOV $125 SOLD
It can come with the pipe its on or I have a new flange and clamp that you can weld onto your existing set up.


Tial 44mm Wastegate $200 PENDING SALE
Vband on both sides, 15lbs spring


Flipped Greddy intercooler made into midmount $125 SOLD
It will come with two red vibrant couplers and 4 clamps
I was running fixed pop ups. Small amount of trimming needs to be done to the core support. Will work with projectors as well.

Polished Freddy intake $100 SOLD
Comes with a block off plate on the IAC, and multiple quick disconnect vaccum fittings. Stock s13 throttle body too.



SR with Greddy oilpan, Ported and Polished Head, Cometic HG, BC 264 cam and HKS adj. cam gears,
autometer oil pressure and water temp sensors, alternator/ powersteering lightweight pulleys, Valve cover with custom AN breathers. $800 PENDING



Vibrant Vaccum Block - $40


S14 Spindles w/ Parts Shop Max Angle Kit $300 PENDING




JGY Fuel Rail with 1000cc Injectors $300
Rail will have to push lock AN fittings for either end for rubber hose