MO 180sx drift car part out

[dsc4130]

hey guys ive decided to move on with my life and abandon this build. as of right now the chassis is pending but if it falls through i will post the info for it

as of right now all the parts are obo so if you dont agree with the price just pm me and we can work on it

* btw there is no dibbs or holding parts, if you dont have the cash please dont waste my time*

first up
-180sx rolling chassis, stripped down for paint but i have all the parts in boxes and ready to go. front end has been tubbed as well as the front frame rails have been capped off with nut-certs to bolt a bash bar to car. has been primed inside and out and will include the rest of the primer with the car. chassis has 75,000 km on it but has had a rough life, 3 months age the frame was straightened and i can get paper work for that, rear fenders have been cut and welded for over fenders. does not come with any aftermarket parts at all nor does it have the climate control stuff
$1500 obo (woulld like to move fast im tired of looking at it)




-s13 hatchback origin stream areo $650 (damage to the front bumper,sides and rear are fine)

(only pic i have as of now will update with more pics asap)
-s13 algernon coilovers, very stiff, made similar to hks and buddy club coils. low miles and just paid $700 for them and used the once $600

-apexi el2 gauge system with link, missing the oil pressure wire $450 (oil pressure, boost,water temp, egt)

very very nice quality gauges
-kouki tails $250 one section of the passager(U.S drivers side is damaged and missing) comes with the left and right tails, center section, and lower garnish, NO lock
drivers side

passenger side

bwave hatch back wing, came with the car and its neon green lol $SOLD

RHD auto power 6 point bolt in cage with door bars $550 no hardware




seibon style jgtc seat, used with a very small rip, $175 just saw them new for $325



redtop sr20, low miles, bought from jdmhookup 1.5 years ago. was just tore down to a long block thoroughly cleaned and all new oem gaskets were installed. has an s15 turbo and injectors along with an exedy stage one street clutch with half life left. will also include an os giken super single that is worn but still use able. also had taka lines and some sort of rocker arm stoppers, jic 3 inch dp and cr racing rad.. $1900



does not have a wring harness
apexi n1 ti 3in catback $450 has damage from being low but is a super light catback and retails for $750
(sry best picture i have right now)



lots more to come so stay tuned

and thanks

[Ph0king]

Just pm'd you, let me know.

[dsc4130]

replying to pm's

[Nismo_sam]

What wing is that (the CF GT wing in the first pic)?

[dsc4130]

Origin 1700mm 2d wing

[slideslidegnarslide]

Wanna sell the metal trim for the tail lights an lock? Pm if interested

[vw203]

are the wheels real?

[J0nJ0n]

Pm'd you. Also shipping for 33415. Thanks!

[J.Winnfield]

Would you part out the kit? I'm interested in the skirts

[yellowxhoodie]

Planning on selling the Origin wing?

[dsc4130]

sry vw203 the wheels are the knock off drags

j.winnfield at the moment id like to sell the kit as a whole

yellowxhoodie sry i dont plan on selling that wing ever haha

gnarslide if i part the tails to my buddy id sell the trim. pm an offer and ill talk to him

all pm's replied, thanks guys!!!

[crystalblue99]

is that 5 lug swap all around?

[DrftKingIII]

Bump for this dude. You'll have to claw the wing from his dead body.

[JDGrimReaper666]

will that cage fit in a rhd s14? pm me if so.

[dsc4130]

Sry t my knowledge s13 and s14 cages are different

[shalezzz]

willing to sell s15 injectors? give you my 370's?

[WhipsGoneWild.net]

sell me the center garnish lol nice partout glws

[NJs13_1993]

how would those coilovers be on the street?

[dsc4130]

shalezzz i really dont want to part the motor, if it comes down to it ill hit you up

whips- if my friend will buy the left and right tail lights ill let you know

njs13- they handle great on the street, if i was building another s13 id keep them but im trying to sell my wrx and part this out to buy a gs430 and travel a bunch
did i mention they handle great in the corners hahaha

chassis info added up top

[NJs13_1993]

where i live the streets are not too great. are they too stiff to be any fun?

[dsc4130]

no i regularly drive an s14 with pbm's that is 2 inches off the ground and they are no where near as stiff

[NJs13_1993]

ill keep it in mind. im looking for coilovers but not too desperate yet.

[ahugg002]

if you start to part the engine I've got cash for the turbo

[Houseof1817]

i want the gauges, please p/m me

[kroid777]

will u separate the kouki tails? Im interested on that center garnish lmk

[dsc4130]

Buuuuump also price drop on the shell $1250!!!! Need it gone

[jars14]

part out those fucking taillights already shit!!!!!!!!!!!

-love you

[igot2fortiesOE]

sent pm.
msglngth

[MomentumDrift-Tyler]

buy tailights now shipped 28117. pm me or txt 980322135six