WTF!!! WRONG INFO ON SPEED LIMITER WIRE!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

240booster · 12-19-2001, 05:29 PM

Ok so i searched the topics on this board and read the topic in FAQ at 240sx.org on cutting the yellow wire with a green stripe at the ECU to kill the speed limiter. So i get in there and cut the yellow wire with the green stripe. Take it for a spin, I try out all the electrical stuff it all works .......  BUT MY CHECK ENGINE LIGHT IS ON!! I though o shit but the engine was running fine and nothing noticeable so i continued on. Got on the interstate AND TOPPED OUT AT 118!!!!!!!  GGGRRRRRRRR   >:-(   So i got back and started clamping that wire back together and then I NOTICED THERE WAS ANOTHER YELLOW WIRE WITH A GREEN STRIPE!!!!!! The one i cut has one single silver dot every inch and the other one has 2 silver dots every inch. Neway, so i repaired the 1st one i cut and then tried the 2nd one ...... IT WORKED!! But my check engine light is still on!!! WHAT THE #### HAVE I DONE!!!! HELP??!!! does neone have a wiring diagram that can tell me what i cut and if i did ne damage or not?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>   THANKS IN ADVANCE.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

12-19-2001, 05:29 PM	#1
240booster Zilvia Member Join Date: Oct 2001 Posts: 245 Trader Rating: (0) Feedback Score: 0 reviews	Ok so i searched the topics on this board and read the topic in FAQ at 240sx.org on cutting the yellow wire with a green stripe at the ECU to kill the speed limiter. So i get in there and cut the yellow wire with the green stripe. Take it for a spin, I try out all the electrical stuff it all works .......  BUT MY CHECK ENGINE LIGHT IS ON!! I though o shit but the engine was running fine and nothing noticeable so i continued on. Got on the interstate AND TOPPED OUT AT 118!!!!!!!  GGGRRRRRRRR   >:-(   So i got back and started clamping that wire back together and then I NOTICED THERE WAS ANOTHER YELLOW WIRE WITH A GREEN STRIPE!!!!!! The one i cut has one single silver dot every inch and the other one has 2 silver dots every inch. Neway, so i repaired the 1st one i cut and then tried the 2nd one ...... IT WORKED!! But my check engine light is still on!!! WHAT THE #### HAVE I DONE!!!! HELP??!!! does neone have a wiring diagram that can tell me what i cut and if i did ne damage or not?<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/confused.gif" border="0" valign="absmiddle" alt='???'>   THANKS IN ADVANCE.