Help... KA24DE Overheating - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kam9311 · 12-02-2012, 11:31 AM

Alright I dont understand whats going on here... My 92 s13 is being very selective with me... It overheats from time to time and when I was away at school my dad would drive it with no problems. I replaced the radiator with an aluminum one. Put a bigger 12" electric fan on it opposed to the stock one. Kept the clutch fan with stock shroud. Changed the water pump and the thermostat.

It will usually drive for about 15 miles at perfect operating temperature and then all of a sudden spike up to pinned at the "H". Now it seems like after I changed all of this it is overheating faster but then sometimes it doesnt even overheat at all. When it does overheat though I can hear the coolant boiling in the upper radiator hose. Please help... Im stumped. Thanks.

91ka24 · 12-02-2012, 03:43 PM

R u sure you properly bled the coolant system? Sounds like u may have air n thks system.

kam9311 · 12-02-2012, 04:01 PM

I have tried a fee times. I cracked open that bleeder screw and squeezed the upper radiator hose a few times. Do you know the complete process or the best way to bleed it?

240low · 12-02-2012, 04:03 PM

hey, this is a good video to show how to do it.. i did it and it workes fine now
240SX KA24DE Coolant system bleeding - YouTube

kam9311 · 12-02-2012, 04:05 PM

Thanks 240low. I'll try it out

nismo03 · 12-02-2012, 06:24 PM

yea i did mine a few months ago...but just rebleed it and you should be golden. good luck man or....one of my friends said leave your radiator cap off overnight and when you wake up in the morning add fluid if needed then do it again every night till you dont need to add fluid....thats what ended up working for me

kam9311 · 12-02-2012, 07:31 PM

Hmmmm thanks ill try that nismo. Thanks

Taylordog2 · 12-06-2012, 04:22 AM

if the problem still isnt fixed, when i bleed my coolant system i jack up the front of my car so that the radiator filler neck is the highest point or your cooling system take the cap off, start it, all the air in the system will go right out and then you can fill it from there.. never had any problems by doing this! if your still overheating after that let us know!

Alamo_City_210 · 12-19-2012, 12:54 PM

Hopefully not but it may be the head gasket. Happened on my gf grand am. Check all cooling system, new sensor, flush, thermostat and then finally, milkshake for oil.

12-02-2012, 11:31 AM	#1
kam9311 Leaky Injector Join Date: May 2012 Location: Orange County Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	Help... KA24DE Overheating Alright I dont understand whats going on here... My 92 s13 is being very selective with me... It overheats from time to time and when I was away at school my dad would drive it with no problems. I replaced the radiator with an aluminum one. Put a bigger 12" electric fan on it opposed to the stock one. Kept the clutch fan with stock shroud. Changed the water pump and the thermostat. It will usually drive for about 15 miles at perfect operating temperature and then all of a sudden spike up to pinned at the "H". Now it seems like after I changed all of this it is overheating faster but then sometimes it doesnt even overheat at all. When it does overheat though I can hear the coolant boiling in the upper radiator hose. Please help... Im stumped. Thanks.

12-02-2012, 03:43 PM	#2
91ka24 Zilvia Junkie Join Date: Sep 2010 Location: Oklahoma city, ok Age: 36 Posts: 414 Trader Rating: (11) Feedback Score: 11 reviews	R u sure you properly bled the coolant system? Sounds like u may have air n thks system. __________________ Follow me on Ig- Andydennington

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-02-2012, 04:01 PM	#3
kam9311 Leaky Injector Join Date: May 2012 Location: Orange County Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	I have tried a fee times. I cracked open that bleeder screw and squeezed the upper radiator hose a few times. Do you know the complete process or the best way to bleed it?

12-02-2012, 04:03 PM	#4
240low Zilvia Member Join Date: Aug 2012 Location: Orange Age: 30 Posts: 184 Trader Rating: (5) Feedback Score: 5 reviews	hey, this is a good video to show how to do it.. i did it and it workes fine now 240SX KA24DE Coolant system bleeding - YouTube

12-02-2012, 04:05 PM	#5
kam9311 Leaky Injector Join Date: May 2012 Location: Orange County Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	Thanks 240low. I'll try it out

12-02-2012, 06:24 PM	#6
nismo03 Join Date: May 2010 Location: Illinois Age: 36 Posts: 31 Trader Rating: (0) Feedback Score: 0 reviews	yea i did mine a few months ago...but just rebleed it and you should be golden. good luck man or....one of my friends said leave your radiator cap off overnight and when you wake up in the morning add fluid if needed then do it again every night till you dont need to add fluid....thats what ended up working for me

12-02-2012, 07:31 PM	#7
kam9311 Leaky Injector Join Date: May 2012 Location: Orange County Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	Hmmmm thanks ill try that nismo. Thanks

12-06-2012, 04:22 AM	#8
Taylordog2 Leaky Injector Join Date: Nov 2012 Location: Oceanside CA Age: 33 Posts: 75 Trader Rating: (0) Feedback Score: 0 reviews	if the problem still isnt fixed, when i bleed my coolant system i jack up the front of my car so that the radiator filler neck is the highest point or your cooling system take the cap off, start it, all the air in the system will go right out and then you can fill it from there.. never had any problems by doing this! if your still overheating after that let us know!

12-19-2012, 12:54 PM	#9
Alamo_City_210 Zilvia Member Join Date: Aug 2012 Location: san antonio tx Posts: 190 Trader Rating: (2) Feedback Score: 2 reviews	Hopefully not but it may be the head gasket. Happened on my gf grand am. Check all cooling system, new sensor, flush, thermostat and then finally, milkshake for oil.