OH Trade my brand new stance coils for you pbm s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

koukimonsters13 · 03-19-2013, 06:08 AM

Hey guys what's up so I bought stance coilovers from enjukuracing at the beginning of my build and now I honestly am looking for pbm since all my other suspension components are pbm, plus I want a coil that I can go LOW LOw on.

These are exactly what I have STANCE Super Sport+ [SS-D] - Nissan 240sx - Enjuku Racing Parts, LLC

jeremyuhh · 03-19-2013, 12:23 PM

you can go low low on these. just remove the collars. exactly what i did on my old s13 and i was taking road reflectors off the freeway

Irresistible · 03-20-2013, 12:21 AM

LOL at thinking Stance can't go lowlow.

koukimonsters13 · 03-20-2013, 10:39 AM

Sorry should have specified. I have the height adjustment alL the way slammed without messing with the preload, it's low but no where close to where I want it.

thizzen4 · 03-20-2013, 10:51 AM

whats ur bottom price pm me

Jfitzg38 · 03-20-2013, 11:30 AM

Stance will be lower than pbm, as someone said already, remove the collars.

jeremyuhh · 03-20-2013, 11:41 AM

Quote:

Originally Posted by koukimonsters13

Sorry should have specified. I have the height adjustment alL the way slammed without messing with the preload, it's low but no where close to where I want it.

i didnt touch my preload. i removed the bottom locking collars. and i was scraping everything and was pretty low.

i have PBMs now and would rather have my old stance gr+ pros back for the sake daily driving.

this is what my car looked like on stance gr+ pro, with just the front collars removed, lowered on stock body. i still had all collars on the rear and still had a lot of room to adjust. if i had aero id be blowing them up everywhere i went

pacotaco345 · 03-20-2013, 11:55 AM

DAMN YOU why can't these be for s13

koukimonsters13 · 03-20-2013, 09:22 PM

This is how its sitting the coils are slammed from the height adjustment with all collars in, im wondering what takin collars out would do... The springs are also preloaded properly and my rim/tire combo is 18x9.5 +12 F&R and 225-40zr-18 yokahama tires.

koukimonsters13 · 03-20-2013, 09:24 PM

I had set my dampening to 3 clicks from fully hjard F&R then installed coils its so stiff i can even push it down... The car that is.... will they settle over time? maybe when the temps arent freezing?

jeremyuhh · 03-20-2013, 09:47 PM

Removing both collars from one coilover will give you about an inch of a drop. Or whatever the length of both collars are combined. You obviously remove the collar and adjust till the spring seat and shock casing/ housing whatever you call it is touching, and that acts as your locking collar.

If that doesn't work for you get PBMs?

koukimonsters13 · 03-20-2013, 10:45 PM

Quote:

Originally Posted by jeremyuhh

Removing both collars from one coilover will give you about an inch of a drop. Or whatever the length of both collars are combined. You obviously remove the collar and adjust till the spring seat and shock casing/ housing whatever you call it is touching, and that acts as your locking collar.

If that doesn't work for you get PBMs?

That makes sense I must was ehh about removing collars hah.. But ill give it a goo and see how she sits

chewyrps13 · 03-20-2013, 11:10 PM

Quote:

Originally Posted by jeremyuhh

i didnt touch my preload. i removed the bottom locking collars. and i was scraping everything and was pretty low.

i have PBMs now and would rather have my old stance gr+ pros back for the sake daily driving.

this is what my car looked like on stance gr+ pro, with just the front collars removed, lowered on stock body. i still had all collars on the rear and still had a lot of room to adjust. if i had aero id be blowing them up everywhere i went

That car looks exactly like my old coupe i painted and sold last year but im pretty dure its not lol

jeremyuhh · 03-21-2013, 12:23 PM

Quote:

Originally Posted by chewyrps13

That car looks exactly like my old coupe i painted and sold last year but im pretty dure its not lol

its not. lol. my car (that pictured coupe) was stolen, recovered stripped, left at the impound, and eventually made its way to the junk yard.

Entranced · 03-28-2013, 07:14 PM

What are the spring rates on these coils and how much are you asking?

03-19-2013, 06:08 AM	#1
koukimonsters13 Zilvia Junkie Join Date: Feb 2012 Location: ohio Posts: 312 Trader Rating: (7) Feedback Score: 7 reviews	Trade my brand new stance coils for you pbm s14 Hey guys what's up so I bought stance coilovers from enjukuracing at the beginning of my build and now I honestly am looking for pbm since all my other suspension components are pbm, plus I want a coil that I can go LOW LOw on. These are exactly what I have STANCE Super Sport+ [SS-D] - Nissan 240sx - Enjuku Racing Parts, LLC

03-20-2013, 12:21 AM	#3
Irresistible Nissanaholic! Join Date: Dec 2009 Location: Chicago, IL Posts: 1,994 Trader Rating: (21) Feedback Score: 21 reviews	LOL at thinking Stance can't go lowlow. __________________ GLEAM//★☆Street Dancer☆★ IG: streetdncr // tumblr: steve-strtdncr

03-20-2013, 10:51 AM	#5
thizzen4 Zilvia FREAK! Join Date: May 2011 Location: tacoma 253 Age: 34 Posts: 1,170 Trader Rating: (22) Feedback Score: 22 reviews	how many miles on em whats ur bottom price pm me

03-20-2013, 11:55 AM	#8
pacotaco345 Zilvia FREAK! Join Date: Jan 2010 Location: SoCal/Ft Worth TX Age: 31 Posts: 1,563 Trader Rating: (5) Feedback Score: 5 reviews	DAMN YOU why can't these be for s13 __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-19-2013, 12:23 PM	#2
jeremyuhh Zilvia FREAK! Join Date: Jan 2010 Location: earth Posts: 1,419 Trader Rating: (51) Feedback Score: 51 reviews	you can go low low on these. just remove the collars. exactly what i did on my old s13 and i was taking road reflectors off the freeway

03-20-2013, 10:39 AM	#4
koukimonsters13 Zilvia Junkie Join Date: Feb 2012 Location: ohio Posts: 312 Trader Rating: (7) Feedback Score: 7 reviews	Sorry should have specified. I have the height adjustment alL the way slammed without messing with the preload, it's low but no where close to where I want it.

03-20-2013, 11:30 AM	#6
Jfitzg38 Zilvia Junkie Join Date: Nov 2011 Location: New Lenox IL Posts: 527 Trader Rating: (8) Feedback Score: 8 reviews	Stance will be lower than pbm, as someone said already, remove the collars.

03-20-2013, 09:22 PM	#9
koukimonsters13 Zilvia Junkie Join Date: Feb 2012 Location: ohio Posts: 312 Trader Rating: (7) Feedback Score: 7 reviews	This is how its sitting the coils are slammed from the height adjustment with all collars in, im wondering what takin collars out would do... The springs are also preloaded properly and my rim/tire combo is 18x9.5 +12 F&R and 225-40zr-18 yokahama tires.

03-20-2013, 09:24 PM	#10
koukimonsters13 Zilvia Junkie Join Date: Feb 2012 Location: ohio Posts: 312 Trader Rating: (7) Feedback Score: 7 reviews	I had set my dampening to 3 clicks from fully hjard F&R then installed coils its so stiff i can even push it down... The car that is.... will they settle over time? maybe when the temps arent freezing?

03-20-2013, 09:47 PM	#11
jeremyuhh Zilvia FREAK! Join Date: Jan 2010 Location: earth Posts: 1,419 Trader Rating: (51) Feedback Score: 51 reviews	Removing both collars from one coilover will give you about an inch of a drop. Or whatever the length of both collars are combined. You obviously remove the collar and adjust till the spring seat and shock casing/ housing whatever you call it is touching, and that acts as your locking collar. If that doesn't work for you get PBMs?

03-28-2013, 07:14 PM	#15
Entranced Leaky Injector Join Date: Sep 2011 Location: NJ Posts: 56 Trader Rating: (4) Feedback Score: 4 reviews	What are the spring rates on these coils and how much are you asking?