NJ Straight from EngineZone: 180sx Blacktop Swap

[Eraism]

Bought the motor 8/9/12
Delivered on a pallet, disassembled manifolds to expose the long block
Degreased, taped, 3 coats of VHT aluminum high heat paint.
Left on engine stand.

Lost interest in build, sold shell, selling my vert, selling some aftermarket SR parts, just over it in general. My ninja has my full blown attention.

Being that the motor is literally fresh off a pallet and wasnt really fucked with..

$1,400.
Pricing it to sell somewhat soon.
Will provide paperwork

comes with:
Ignitor chip
Intake manifold
full uncut harness and starter
alternator
ac compressor
exhuast manifold
t25 turbo with elbow and o2 still attached
Mine's approved ECU
Trans (also cleaned and painted)
Stock shifter
flywheel, pressure plate, Nismo clutch

I have a bunch of parts from enjuku as well, selling that stuff separate
Isis radiator, Isis V2 bottom mount manifold, turbo lines, new gaskets, etc just random parts and pulleys and what not.

TEXT: 646-321-4038

[luiss14]

if you have this on june 17 i will forsure buy it off u

Originally Posted by Eraism

Bought the motor 8/9/12
Delivered on a pallet, disassembled manifolds to expose the long block
Degreased, taped, 3 coats of VHT aluminum high heat paint.
Left on engine stand.

Lost interest in build, sold shell, selling my vert, selling some aftermarket SR parts, just over it in general. My ninja has my full blown attention.

Being that the motor is literally fresh off a pallet and wasnt really fucked with..

$1,400.
Pricing it to sell somewhat soon.
Will provide paperwork

comes with:
Ignitor chip
Intake manifold
full uncut harness and starter
alternator
ac compressor
exhuast manifold
t25 turbo with elbow and o2 still attached
Mine's approved ECU
Trans (also cleaned and painted)
Stock shifter
flywheel, pressure plate, Nismo clutch

I have a bunch of parts from enjuku as well, selling that stuff separate
Isis radiator, Isis V2 bottom mount manifold, turbo lines, new gaskets, etc just random parts and pulleys and what not.

TEXT: 646-321-4038

[Eraism]

Originally Posted by luiss14

if you have this on june 17 i will forsure buy it off u

Sounds good. Text my number for a location

[Eraism]

Still have this

[Jasonsallade]

going to east coast bash by any chance? a buddy and myself will be there and id be interested in your motor/trans if you still have it by then (the 29th and 30th of this month)