|
|
|||||||
| Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
|
|
Thread Tools | Display Modes |
07-12-2013, 08:26 AM
|
#1 |
|
Zilvia FREAK!
 
Join Date: May 2011
Location: Oklahoma
Age: 39
Posts: 1,122
Trader Rating: (13)
  Feedback Score: 13 reviews
|
power window will not move up or down
Yesterday I get in the car and back out of the garage. ( my drivers window is about halfway up) I push the up button and the window goes up like an inch then stops, so I push the down button and it goes down about 2 inches then stops and now it will not move at all. i took off the door panel, and i can hear the little black box clicking as i push the button. i can roll down my passenger side window just fine. checked the fuse and its good. any ideas ? thanks.
edit : s13 , sorry forgot to mention that.
__________________
 @streetstyle_jay Last edited by jsu1012; 07-12-2013 at 10:24 AM.. |
|
|
| Sponsored Links |
|
07-12-2013, 08:30 AM
|
#2 |
|
Nissanaholic!
 
Join Date: Jun 2007
Location: Kathleen, GA
Age: 53
Posts: 1,956
Trader Rating: (0)
 Feedback Score: 0 reviews
|
Could just be a bad switch or relay. Could be something in the motor. However, I am not certain it would be the motor since it doesn't load down & pop the fuse.
__________________
|
|
|
|
|
07-12-2013, 09:24 AM
|
#4 | |
|
Zilvia FREAK!
Join Date: May 2011
Location: Oklahoma
Age: 39
Posts: 1,122
Trader Rating: (13)
Feedback Score: 13 reviews
|
Quote:
the window amp relay?
__________________
@streetstyle_jay |
|
|
|
|
|
07-12-2013, 09:44 AM
|
#6 |
|
Zilvia Junkie
 
Join Date: Jun 2008
Location: Houston, Tx
Age: 38
Posts: 368
Trader Rating: (32)
Feedback Score: 32 reviews
 |
You could check it by testing the motor.
Give it 12v and ground on the connector to the window motor. If it works, most likely your problem is with the switch.
__________________
 Instagram @hiighboost @iasperformance |
|
|
|
|
07-12-2013, 09:45 AM
|
#7 |
|
Zilvia FREAK!
|
Ima blame the amp.
push the plug into the amp with a little force and try again. Sometimes those connections just suck. you can also just supply Positive and Negative directly to the motor plug if you NEED to get it up for weather/theft reasons
__________________
cONtRol FReAkS |
|
|
|
|
07-12-2013, 10:28 AM
|
#8 |
|
Zilvia FREAK!
Join Date: May 2011
Location: Oklahoma
Age: 39
Posts: 1,122
Trader Rating: (13)
Feedback Score: 13 reviews
|
wow guys thank you for the quick responses. and yes yesterday was urgent lol, the one day it fucking rains in dry ass Oklahoma.. my window doesn't work. hahaha my luck. i'll try those tips today, also watched a vid on how to fix the amp relay. i will chime in to let people know what does and doesn't work to fix it. so many threads on zilvia with no end results.
__________________
@streetstyle_jay |
|
|
|
|
07-12-2013, 05:31 PM
|
#11 | |
|
Post Whore!
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 34
Posts: 7,721
Trader Rating: (10)
Feedback Score: 10 reviews
|
You sure the cables didn't bind up or snap on the regulator? That's what happened to both of mine
__________________
Quote:
|
|
|
|
|
|
07-12-2013, 09:12 PM
|
#12 |
|
Zilvia FREAK!
Join Date: May 2011
Location: Oklahoma
Age: 39
Posts: 1,122
Trader Rating: (13)
Feedback Score: 13 reviews
|
I checked the amp. I tested the wires and the motor was getting power. Took the whole assembly out and tested the motor. Nothing. Took the motor apart and it's shot.
__________________
@streetstyle_jay |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
