z32 calipers wont fit - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Clicky · 07-18-2013, 10:19 PM

So i got some z32. 30Mm. Calipers for my s14.
I bought some 30mm rotors from autozone. And for some reason the rotors hit
The inside of the calipers... dont know what to do, i thpught it was a direct fitment.

When off the car the rotors fit into the calipers just fine.

It only begins to rub where the rotor sits in between the caliper when i tighten the caliperbolts .

And i even measured both caliper and rotor. Both 30mm with some change

07-18-2013, 10:19 PM	#1
Clicky Zilvia Member Join Date: Mar 2011 Location: Long Beach Posts: 280 Trader Rating: (0) Feedback Score: 0 reviews	z32 calipers wont fit So i got some z32. 30Mm. Calipers for my s14. I bought some 30mm rotors from autozone. And for some reason the rotors hit The inside of the calipers... dont know what to do, i thpught it was a direct fitment. When off the car the rotors fit into the calipers just fine. It only begins to rub where the rotor sits in between the caliper when i tighten the caliperbolts . And i even measured both caliper and rotor. Both 30mm with some change

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode