MD s13 random parts, coils, 5 lug, stuff, wheels

[mrcooper]

i got a set of JDM JIC s13 coils- all in good condition, little dirty few scratches. have camber plates. only bad thing is they are drilled to fit s14 knuckle- $500



got a set of front 5 lug spindles from s14- hubs/bearing good have less then 5k miles on new hubs. left side has one lug broken off dust shields removed, not cut/bent- 200


brand new oem s14 5 lug hub/bearing- 100

circuit sport alum over flow tank- 60


alum s13 sr koyo rad, had small hole in bottom tank fixed with jb weld holds pressure fine, no leaks- 125 obo


^^patch looks big but actual hole was very very small. didnt notice the leak for a few months

06 z33 driver seat black cloth no rips/tears/burns cut and welded to corbeau seat rail for 240sx- 200



complete rear suspension/sub frame/brakes/rotors(pads and rotors basicly brand new, maybe 30 miles)- only missing shocks and diff- 150


set of 4 JDM 16 inch wheels, both 4/5 lug nissan bolt pattern not sure of brand or offset, all tires are bad, the rims are super light staggerd, i think 8 in rear 7 or 7.5 front, pretty dirty, no major scratches or curb rash i can get more detailed pics if needed, no center caps, great for spares,fronts clear z32 brakes with 10mm spacer, 5mm if the logos are grinded off the calipers- 275






s13 clutch pedal and clutch master cyl- 80


s13 black dash few scratches, no cracks pretty clean over all - 75


JDM black s13 coupe tails - 125 dont have pics atm, but the link to nico has pics of them on the car i pulled them from

complete energy susp. bushing kit new, bow got wet- 80



the coils, wheels and tail lights came from the black silvia on this link- car got seized coming to america
From japan to the crusher : 240sx General Discussion




email for fastest response or shoot a txt with your name and what your looking for- will not answer phone calls just txt

email- incubus21146 at yahooo.
txt- for four three eight 5 2 22 five 2



local to annapolis MD
looking for pick ups- not really looking to ship but will if needbe, paypal accepted
just hit me up we can work on pricing most things are obo