Help alternator install. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

theu1986 · 08-09-2014, 10:01 AM

Ok so i removed alternator at 4 am this morning. (long story) I woke up this morning to re install alternator and poof kinda forgot the re install method.... i kno i kno

. I have the alternator mounted by the pivot bolt right now (bottom bolt. But now i have these two bolts (pictured below) and i can't figure this out. Please Please Please help me figure this out.

[IMG]

[/IMG]

[IMG]

[/IMG]

Kaifd3s · 08-09-2014, 10:08 AM

The long bolt goes through the bracket into the "square" bolt. The "square" bolt then bolts to the top hole on the alternator. Adjust with the belt on, and your done.

theu1986 · 08-09-2014, 10:42 AM

Thanks Bro. fit on there perfect. Thanks again. close thread

08-09-2014, 10:01 AM	#1
theu1986 Leaky Injector Join Date: Mar 2013 Location: fl Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	Help alternator install. Ok so i removed alternator at 4 am this morning. (long story) I woke up this morning to re install alternator and poof kinda forgot the re install method.... i kno i kno . I have the alternator mounted by the pivot bolt right now (bottom bolt. But now i have these two bolts (pictured below) and i can't figure this out. Please Please Please help me figure this out. [IMG][/IMG] [IMG][/IMG]

08-09-2014, 10:08 AM	#2
Kaifd3s Zilvia Addict Join Date: Feb 2008 Location: Tamarac, Florida Age: 39 Posts: 694 Trader Rating: (16) Feedback Score: 16 reviews	The long bolt goes through the bracket into the "square" bolt. The "square" bolt then bolts to the top hole on the alternator. Adjust with the belt on, and your done. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-09-2014, 10:42 AM	#3
theu1986 Leaky Injector Join Date: Mar 2013 Location: fl Posts: 55 Trader Rating: (0) Feedback Score: 0 reviews	Thanks Bro. fit on there perfect. Thanks again. close thread