Weird question regarding boot kit for inner tie rods - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

sunrat · 11-22-2014, 12:34 PM

I have a 1996 zenki and when I was changing out my inner tie rods, I noticed the different diameter in boot sizes for the driver and passenger side.

The driver side had an opening of almost 2 1/8 inches while the passenger side had about 1.8 inch.

Imagine my surprise when I bought these bellow kits from advance and discovered that one was too small.

Anyway, I used an exacto knife and got the driver side to fit (I hope) and zip tied it down the best I could.

Anyway, I tried searching and it doesn't seem like a common issue, did I do something wrong? Can anyone else confirm? How do I order the correct driver side size? Dealer?

Thanks.

sunrat · 11-22-2014, 03:06 PM

Here are the sizes

ImageUploadedByTapatalk1416693945.946845.jpg ImageUploadedByTapatalk1416693956.163059.jpg

sunrat · 11-24-2014, 10:51 AM

Bump. Any ideas guys? The cut one just fell off, no surprise there.

I'm thinking about buying an 96 Audi A4 boot because the end diameter is bigger. A bit above two inches

sunrat · 11-24-2014, 07:03 PM

Bought one for an Acura RL. Beck part number 1032684.

bmxer882x · 11-24-2014, 07:38 PM

Quote:

Originally Posted by sunrat

Bought one for an Acura RL. Beck part number 1032684.

There's ur problem

sunrat · 11-24-2014, 07:40 PM

What are you saying? Nothing else was working.

11-22-2014, 12:34 PM	#1
sunrat Leaky Injector Join Date: Dec 2005 Location: Peoria, IL Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	Weird question regarding boot kit for inner tie rods I have a 1996 zenki and when I was changing out my inner tie rods, I noticed the different diameter in boot sizes for the driver and passenger side. The driver side had an opening of almost 2 1/8 inches while the passenger side had about 1.8 inch. Imagine my surprise when I bought these bellow kits from advance and discovered that one was too small. Anyway, I used an exacto knife and got the driver side to fit (I hope) and zip tied it down the best I could. Anyway, I tried searching and it doesn't seem like a common issue, did I do something wrong? Can anyone else confirm? How do I order the correct driver side size? Dealer? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-22-2014, 03:06 PM	#2
sunrat Leaky Injector Join Date: Dec 2005 Location: Peoria, IL Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	Here are the sizes ImageUploadedByTapatalk1416693945.946845.jpg ImageUploadedByTapatalk1416693956.163059.jpg

11-24-2014, 10:51 AM	#3
sunrat Leaky Injector Join Date: Dec 2005 Location: Peoria, IL Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	Bump. Any ideas guys? The cut one just fell off, no surprise there. I'm thinking about buying an 96 Audi A4 boot because the end diameter is bigger. A bit above two inches

11-24-2014, 07:03 PM	#4
sunrat Leaky Injector Join Date: Dec 2005 Location: Peoria, IL Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	Bought one for an Acura RL. Beck part number 1032684.

11-24-2014, 07:40 PM	#6
sunrat Leaky Injector Join Date: Dec 2005 Location: Peoria, IL Posts: 81 Trader Rating: (0) Feedback Score: 0 reviews	What are you saying? Nothing else was working.