Isis 4inch tip blast pipes - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

oki_jamez · 11-05-2014, 09:38 PM

So I ordered the Isis 4inch tip blast pipe exhaust for my SR'd hatch and I researched but I couldn't really find a good review on the pipes so can any one tell me from personal experience. Oh and I also bought the Isis test pipe.

s&tcustoms · 11-12-2014, 07:24 PM

I have the 3 inch tip one, with a test pipe and its stupid loud, but the exhaust seems to be made really well and hangs up pretty tight with some new hangers.

R_Rod_s13 · 11-12-2014, 07:46 PM

It's going to be stupid loud just to let u know.. But they look good tho so that's always good aha

Renelovesnike · 11-12-2014, 08:03 PM

There crazzy loud at higher RPM's and they fit perfectly snug and the catback is surprisingly heavy and the welds look good ass hell since there robotocly tig'd oh and your neighbors are gonna hate you if they dont do so already*

juhd · 11-12-2014, 08:38 PM

hows the ground clearance on them?

iRONDONkey · 11-12-2014, 08:56 PM

i had the 4" exhaust tip. I had to get rid of it. it was way too loud.

that exhaust will SCREAMMMMMMMMMMMMMMMMMMMMMMMMMMMM

as for fitment, it sits pretty low. I paid extra to get it to sit higher. they had to cut off my rear tow hook from the drivers side, and weld on some new/shorter hangers to get it sit higher.

pacotaco345 · 11-12-2014, 10:00 PM

I just put it on my car, sounds great (sr with cams), pretty loud but I'd imagine way louder N/A. It does scrape a lot though where it dips around the subframe...

vipergtsr1000hp · 12-04-2014, 07:57 AM

I had the 4in tips. Hanged low as hell especially near the subframe. Had to redo the hangars. Then again I know some people where theirs hug the chassis. Car was loud as crap with the ka24. Your neighbors will hate you lol. After swapping a sr20, it sounded much better and quieter.

Ra64mike · 12-04-2014, 08:52 AM

I have a buddy with the 4 inch tips on his dual cam hatch, I can here him like 3 miles away

Mr.Doback · 12-04-2014, 09:29 AM

On SR, its not too bad at idle. Anything beyond its pretty loud. Wide open throttle is ridiculous and raspy with no cat or anything else. My setup is pbm cobra to test pipe to 4" blast pipes and i actually don't like the sound it makes at wot with s14 sr and working vtc, its a bit too raspy. Considering adding a muffler to clean up the sound.

Exhaust hangs low on mine, but I also have pbm subframe risers so it appears even lower between subframe, need to get hangers redone since I can't raise it anymore with hose clamps. Be ready for cops to hear you as well.

11-05-2014, 09:38 PM	#1
oki_jamez Join Date: Aug 2014 Location: lacey WA Age: 30 Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Isis 4inch tip blast pipes So I ordered the Isis 4inch tip blast pipe exhaust for my SR'd hatch and I researched but I couldn't really find a good review on the pipes so can any one tell me from personal experience. Oh and I also bought the Isis test pipe.

11-12-2014, 10:00 PM	#7
pacotaco345 Zilvia FREAK! Join Date: Jan 2010 Location: SoCal/Ft Worth TX Age: 31 Posts: 1,563 Trader Rating: (5) Feedback Score: 5 reviews	I just put it on my car, sounds great (sr with cams), pretty loud but I'd imagine way louder N/A. It does scrape a lot though where it dips around the subframe... __________________

12-04-2014, 09:29 AM	#10
Mr.Doback Zilvia Member Join Date: Sep 2011 Location: Ventura, CA Age: 36 Posts: 157 Trader Rating: (2) Feedback Score: 2 reviews	On SR, its not too bad at idle. Anything beyond its pretty loud. Wide open throttle is ridiculous and raspy with no cat or anything else. My setup is pbm cobra to test pipe to 4" blast pipes and i actually don't like the sound it makes at wot with s14 sr and working vtc, its a bit too raspy. Considering adding a muffler to clean up the sound. Exhaust hangs low on mine, but I also have pbm subframe risers so it appears even lower between subframe, need to get hangers redone since I can't raise it anymore with hose clamps. Be ready for cops to hear you as well. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-12-2014, 07:24 PM	#2
s&tcustoms Join Date: Apr 2014 Location: Upstate NY Age: 30 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	I have the 3 inch tip one, with a test pipe and its stupid loud, but the exhaust seems to be made really well and hangs up pretty tight with some new hangers.

11-12-2014, 08:03 PM	#4
Renelovesnike Nissanaholic! Join Date: Jun 2009 Location: (562) Posts: 1,616 Trader Rating: (30) Feedback Score: 30 reviews	There crazzy loud at higher RPM's and they fit perfectly snug and the catback is surprisingly heavy and the welds look good ass hell since there robotocly tig'd oh and your neighbors are gonna hate you if they dont do so already*

11-12-2014, 08:38 PM	#5
juhd Zilvia Junkie Join Date: Sep 2012 Location: San Diego Age: 30 Posts: 589 Trader Rating: (9) Feedback Score: 9 reviews	hows the ground clearance on them?

11-12-2014, 08:56 PM	#6
iRONDONkey Zilvia Junkie Join Date: Sep 2007 Location: in yo mailbox! Posts: 463 Trader Rating: (1) Feedback Score: 1 reviews	i had the 4" exhaust tip. I had to get rid of it. it was way too loud. that exhaust will SCREAMMMMMMMMMMMMMMMMMMMMMMMMMMMM as for fitment, it sits pretty low. I paid extra to get it to sit higher. they had to cut off my rear tow hook from the drivers side, and weld on some new/shorter hangers to get it sit higher.

12-04-2014, 07:57 AM	#8
vipergtsr1000hp Zilvia Junkie Join Date: Apr 2010 Location: dirty south Posts: 307 Trader Rating: (2) Feedback Score: 2 reviews	I had the 4in tips. Hanged low as hell especially near the subframe. Had to redo the hangars. Then again I know some people where theirs hug the chassis. Car was loud as crap with the ka24. Your neighbors will hate you lol. After swapping a sr20, it sounded much better and quieter.

12-04-2014, 08:52 AM	#9
Ra64mike Join Date: Dec 2013 Location: Washington Age: 33 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	I have a buddy with the 4 inch tips on his dual cam hatch, I can here him like 3 miles away