Sr20det timing problem

[Loomis112]

So I made a post recently about an over boosting problem and was directed to checking my timing.


I did everything I was supposed to let it warm up, unplug the TPS and rev it to 3k 2-3 times, etc

Problem is after all that the car sits idling at like 2k I didn't know that wasn't normal so I started to adjust the CAS to the 2nd mark from the right and now the car runs like shit.

So did I miss something or is there something wrong with the idle because as far as I have seen when other sr20's CAS is unplugged the idle goes right back down.


I'm also running an Apexi neo AFC is there a problem with that???