NM FS/T; S13 Body kit molds, RB25 block, RB26 head, itbs, valve covers, RB20 tra...

[c72c]

Location- Albuquerque, NM
Shipping- Prefer local pickup. I don't have much time to ship anything working 7 days a week. I may be able to meet within a few hours drive for certain parts.
Payment- Paypal or cash. Prices are negotiable.
Contact- PM or text 52O249IO38

Will trade for body kit (s14 kouki front, s13 hatch sides/rear, rocket bunny style wing), VQ35 to S13 swap parts.

S13 hatch BN Type 3 style body kit molds. $1500
(Front bumper for flip ups, side skirts, rear bumper, and quarter panels)
The molds were made from a BN kit by a shop in Okinawa. They're old and used. There are a few spots on the quarter panels and front bumper that will need repair...or You could leave them the way they are and just do a little extra sanding on the plugs you pull from them. Other than that, they just need to be cleaned, there is still some release wax on them.

This style...












the white stuff is the old release wax.












some pics of parts I've done








this was just a test piece of the sideskirt


R33 engine cross member - $100


RB26 Arospeed cam gears- $100
new, never installed


Coby D12 header- $500
Originally for an RB25DE. Swapped the flanges with RB26 flanges. I can't confirm if it will fit LHD vehicles.






_______________________

~ I will have pictures of the following items if needed when I get back to my storage unit. ~

RB25(DE) bare block - $150
Block is from an R32, no vct.
Decided not to pull it all the way out of the box, so this is all you get.
ImageUploadedByTapatalk1424923920.257620.jpg

RB26 head - $300
partially disassembled but all there. Will bolt up directly to the 25 block I have.

RB26 intake - $300
ITBs, vacuum block, throttle linkage and collector (whole thing). I don't think I have all the sensors for it though.
ImageUploadedByTapatalk1424924040.678833.jpg
ImageUploadedByTapatalk1424924057.350051.jpg
ImageUploadedByTapatalk1424924071.381552.jpg


RB26 crank - $150
short snout, it spun #1 rod bearing.
ImageUploadedByTapatalk1424923984.641265.jpg

RB26 4pc valve cover set - $OLD
both cam covers, coil pack cover and timing cover. Only pieces I don't have is the thin plate that goes behind the cam gears to hold the upper timing cover and the lower plastic timing cover.
valve covers and timing cover were lightly bead blasted, still need some work before finishing. coil cover is the typical chipped black paint.
ImageUploadedByTapatalk1424923942.854631.jpg
ImageUploadedByTapatalk1424923957.171457.jpg
ImageUploadedByTapatalk1424923968.555963.jpg

RB26 OEM Pistons and rods- $100
Used, still good.

RB25DE 5spd transmission - $200
came out of an r32, same as an rb20/SR trans, just different casing.

R200 diff - $150
6 bolt. It's not open, but I haven't looked inside to see what it is yet.

RB25 oem oil pan - $50

[smoked240]

I'd really love the rb26 head or Itb's. Interested in trades?

[rgnhd]

Isn't that a rb20? or rb20 head?

[c72c]

Originally Posted by smoked240

I'd really love the rb26 head or Itb's. Interested in trades?

I'll consider some trades. What I mainly want to trade for is listed at the top of the post.

[c72c]

Originally Posted by rgnhd

Isn't that a rb20? or rb20 head?

No. That's an rb25 block with an rb26 head and rb20 valve covers. You can look at the exhaust flange pattern to see that.
Either way, the header is what is being sold in the picture. The engine parts I have were spares for the one in the picture.

[dropedS13]

Hey man I pm'd you about the valve covers

[c72c]

Originally Posted by dropedS13

Hey man I pm'd you about the valve covers

All PMs and texts replied, and more pictures added.

[c72c]

Bump.......

[smoked240]

Willing to split the itbs?

[c72c]

Originally Posted by smoked240

Willing to split the itbs?

Not unless someone else wants the collector.

[Zed Nismo]

hows the condition on the rb25 oil pan?