Z32 26mm Caliper Spacer (30mm conv.) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

bks14sr · 04-25-2016, 04:35 PM

Not sure if anybody has tried this, but figured I would. Had a set of 26mm calipers sitting around, so decided to make a spacer to convert these to 30 mm. With 30mm oem hardware/o rings, I don't see why this wouldn't work. Tweaked my model a few times and printed out some prototypes. Fitment is great, so I'm gonna machine a batch of these out.

So my question is, has anybody else here tried this yet or are there any obvious reasons I'm missing as to why this wouldn't work?

Will post pics after work.

04-25-2016, 04:35 PM	#1
bks14sr Zilvia Member Join Date: Nov 2006 Location: st. pete, FL Age: 40 Posts: 252 Trader Rating: (3) Feedback Score: 3 reviews	Z32 26mm Caliper Spacer (30mm conv.) Not sure if anybody has tried this, but figured I would. Had a set of 26mm calipers sitting around, so decided to make a spacer to convert these to 30 mm. With 30mm oem hardware/o rings, I don't see why this wouldn't work. Tweaked my model a few times and printed out some prototypes. Fitment is great, so I'm gonna machine a batch of these out. So my question is, has anybody else here tried this yet or are there any obvious reasons I'm missing as to why this wouldn't work? Will post pics after work.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode